Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: XL-1

MANUFACTURED BY:
HOMELITE-TERRY MACHINERY
POINTE CLAIRE, QUEBEC, CANADA
SERIES OR ASSEMBLY NUMBER:
SERIAL NUMBER PREFIX:
YEAR INTRODUCED:
1971
YEAR DISCONTINUED:
ENGINE DISPLACEMENT:
2.5 cu. in. (45 ccm)
NUMBER OF CYLINDERS:
Homelite Two-Cycle single cylinder loop scavenged engine
CYLINDER BORE:
1.5625 in.
PISTON STROKE:
1.3125 in.
PISTON RING THICKNESS:
CYLINDER TYPE:
INTAKE METHOD:
MANUFACTURER ADVERTISED H.P.:
WEIGHT:
OPERATOR CONFIGURATION:
HANDLEBAR SYSTEM:
CHAIN BRAKE:
CLUTCH:
DRIVE TYPE:
CONSTRUCTION:
MAGNETO TYPE:
CARBURETOR:
MAJOR REPAIR KIT:
MINOR REPAIR KIT:
AIR FILTER SYSTEM:
STARTER TYPE:
OIL PUMP:
MAXIMUM ENGINE RPM:
IDLE RPM:
IGNITION TIMING:
BREAKER POINT SETTING:
FLYWHEEL/COIL AIR GAP:
SPARK PLUG TYPE:
SPARK PLUG GAP:
CRANKSHAFT MAIN BEARINGS:
FUEL TANK CAPACITY:
FUEL OIL RATIO:
RECOMMENDED FUEL OCTANE:
MIX OIL SPECIFICATION:
CHAIN PITCH:
CHAIN TYPE:
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED:
LONGEST GUIDE BAR SUPPLIED:
COLOUR SCHEME:
PAINT CODES:
ILLUSTRATED PARTS LIST:
IPL no. 24323T, 24323 rev5, 24323 rev6
SERVICE MANUAL:

COMMENTS:
Manufactured in Canada



 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2024 MIKE ACRES - All rights are reserved.