Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: 9-26

MANUFACTURED BY:
HOMELITE-TEXTRON
PORT CHESTER, NEW YORK, USA
SERIES OR ASSEMBLY NUMBER:
900G series Gear Drives, 9-26, 9-26-A, 9-26-A1
serial numbers start at 910411
SERIAL NUMBER PREFIX:
YEAR INTRODUCED:
June 1959
YEAR DISCONTINUED:
April 1960
ENGINE DISPLACEMENT:
6.11 cu. in. (100 ccm)
NUMBER OF CYLINDERS:
Homelite Two-Cycle single cylinder loop scavenged engine
CYLINDER BORE:
2.1875 in. (55.5mm)
PISTON STROKE:
1.625 in. (41.7mm)
PISTON RING THICKNESS:
0.0625 in. pn 56291
CYLINDER TYPE:
Aluminum with Chrome plated bore
INTAKE METHOD:
Reed valves (4 petal pyramid)
MANUFACTURER ADVERTISED H.P.:
not advertised
WEIGHT:
26 lbs. powerhead only
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
Rigid
CHAIN BRAKE:
none
CLUTCH:
Centrifugal, 6 metal shoes
DRIVE TYPE:
3 Gear reduction, 2.84:1 ratio standard, optional 3.57:1
CONSTRUCTION:
Die cast Magnesium
MAGNETO TYPE:
Flywheel type, Phelon, with breaker points
CARBURETOR:
Tillotson HL-62A replaced by HL-119A
MAJOR REPAIR KIT:
nla for HL-62A, RK-88HL for HL119A
MINOR REPAIR KIT:
DG-1HL for HL-62A, DG-5HL for HL-119A
AIR FILTER SYSTEM:
Wix paper element
STARTER TYPE:
Homelite automatic rewind with overrunning bearing,
replacement cord is 48 in. of #5
OIL PUMP:
Manual
MAXIMUM ENGINE RPM:
9,000 free, 6,000 under load with air vane governor
IDLE RPM:
IGNITION TIMING:
fixed
BREAKER POINT SETTING:
0.015 in. (0.38mm)
FLYWHEEL/COIL AIR GAP:
Fixed position
SPARK PLUG TYPE:
Champion HO-3
SPARK PLUG GAP:
0.025 in. (0.63mm)
CRANKSHAFT MAIN BEARINGS:
Ball on drive end, caged needle roller on flywheel end
FUEL TANK CAPACITY:
56 oz. (1.56 literes)
FUEL OIL RATIO:
1/2 pint to 1 gallon with Homelite oil
RECOMMENDED FUEL OCTANE:
Regular
MIX OIL SPECIFICATION:
Homelite chain saw mix oil
CHAIN PITCH:
1/2 in. or 9/16 in.
CHAIN TYPE:
Oregon 10C, 10L or 4C, 4L
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED:
18 in. (45cm)
LONGEST GUIDE BAR SUPPLIED:
60 in. (152cm)
COLOUR SCHEME:
Homelite Red cylinder shroud, flywheel shroud, and handle support. Canyon Green fuel tank, and pulley cover. Black piston grip.
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:
Wrap around front handle optional


A Giant Sitka Spruce
Copy of Ektachrome Photo by Phil Vecqueray
This giant Sitka Spruce tree measured 17 ft. 7 inches (5.4 m) across the butt. The first 24 ft. (7.3 m) log contained sufficient lumber to build a two bedroom home - a small hotel could be constructed from the entire tree. Estimated age of this spruce is 463 years. The tree was felled over 40 years ago at Juskatla Camp on the Queeen Charlotte Islands of British Columbia. The saw used was a Homelite 9-26.
 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2024 MIKE ACRES - All rights are reserved.