MANUFACTURED BY: |  | STIHL ANDREAS MASCHINENFABRIK |
 | | STUTTGART, GERMANY |
SERIES OR ASSEMBLY NUMBER: | | 1119 |
SERIAL NUMBER PREFIX: | | |
YEAR INTRODUCED: | | 1980 |
YEAR DISCONTINUED: | | 1985 |
ENGINE DISPLACEMENT: | | 61ccm (3.72 cu. in.) |
NUMBER OF CYLINDERS: | | 1 |
CYLINDER BORE: | | 48mm (1.89 in.) |
PISTON STROKE: | | 34mm (1.34 in.) |
PISTON RING THICKNESS: | | 1.5 mm |
CYLINDER TYPE: | | Aluminum with chrome plated bore |
INTAKE METHOD: | | Piston ported |
MANUFACTURER ADVERTISED H.P.: | | not advertised |
WEIGHT: | | 15 lbs. powerhead only |
OPERATOR CONFIGURATION: | | One Man operation |
HANDLEBAR SYSTEM: | | Anti-vibration |
CHAIN BRAKE: | | Inertia activated |
CLUTCH: | | Centrifugal |
DRIVE TYPE: | | Direct |
CONSTRUCTION: | | Die cast magnesium |
MAGNETO TYPE: | | Bosch |
CARBURETOR: | | Tillotson HK-29A, 42A, 42B
Bing diaphragm type |
MAJOR REPAIR KIT: | | RK-32HK for HK-29A
RK-33HK for HK-42A, B |
MINOR REPAIR KIT: | | DG-1HK |
AIR FILTER SYSTEM: | | Nylon mesh element |
STARTER TYPE: | | Stihl automatic rewind |
OIL PUMP: | | Automatic |
MAXIMUM ENGINE RPM: | | 12,000 |
IDLE RPM: | | 2,800 |
IGNITION TIMING: | | 2.3 to 2.7mm (0.090 to 0.106 in.) before TDC |
BREAKER POINT SETTING: | | 0.35 to 0.40mm ( 0.014 to 0.016 in.) |
FLYWHEEL/COIL AIR GAP: | | |
SPARK PLUG TYPE: | | Bosch WSR6F, Champion RDJ7Y |
SPARK PLUG GAP: | | 0.51mm (0.020 in.) |
CRANKSHAFT MAIN BEARINGS: | | Ball |
FUEL TANK CAPACITY: | | |
FUEL OIL RATIO: | | 40:1 |
RECOMMENDED FUEL OCTANE: | | Regular |
MIX OIL SPECIFICATION: | | Stihl two-cycle chain saw mix oil |
CHAIN PITCH: | | 3/8 in., 0.050 gauge |
CHAIN TYPE: | | Stihl |
BAR MOUNT PATTERN: | | 31 link |
SHORTEST GUIDE BAR SUPPLIED: | | 40cm (16 in.) |
LONGEST GUIDE BAR SUPPLIED: | | 81cm (32 in.) |
COLOUR SCHEME: | | Grey with Red top cover |
PAINT CODES: | | |
ILLUSTRATED PARTS LIST: | | |
SERVICE MANUAL: | | |