MANUFACTURED BY: |  | STIHL ANDREAS MASCHINENFABRIK |
 | | STUTTGART, GERMANY |
SERIES OR ASSEMBLY NUMBER: | | 1110 |
SERIAL NUMBER PREFIX: | | |
YEAR INTRODUCED: | | 1967 |
YEAR DISCONTINUED: | | 1986 |
ENGINE DISPLACEMENT: | | 61ccm 3.72 cu. in.) |
NUMBER OF CYLINDERS: | | 1 |
CYLINDER BORE: | | 44mm (1.73 in.) |
PISTON STROKE: | | 40mm (1.57 in.) |
PISTON RING THICKNESS: | | 1.5 mm, 2 rings used |
CYLINDER TYPE: | | Aluminum with Chrome plated bore |
INTAKE METHOD: | | Piston ported |
MANUFACTURER ADVERTISED H.P.: | | 5.5 |
WEIGHT: | | 16 lbs. with 13 in. bar & chain |
OPERATOR CONFIGURATION: | | One Man operation |
HANDLEBAR SYSTEM: | | Anti-Vibration |
CHAIN BRAKE: | | Mechanical |
CLUTCH: | | Centrifugal |
DRIVE TYPE: | | Direct |
CONSTRUCTION: | | Die cast Magnesium |
MAGNETO TYPE: | | Bosch |
CARBURETOR: | | Tillotson HS-29A, B, C, D, HS-77A, B, C,
HS-87A, HS-100A, HS-138A, HS-208A |
MAJOR REPAIR KIT: | | RK-21HS for HS-87, HS100
RK-23HS for HS-29, HS-77, HS-138, HS208 |
MINOR REPAIR KIT: | | DG-3HS/T for HS-87, HS100
DG-5HS/T for HS-29, HS-77, HS-138, HS-208 |
AIR FILTER SYSTEM: | | Nylon mesh emement |
STARTER TYPE: | | Stihl automatic rewind |
OIL PUMP: | | Automatic |
MAXIMUM ENGINE RPM: | | |
IDLE RPM: | | |
IGNITION TIMING: | | 0.095 to 0.102 in. before TDC |
BREAKER POINT SETTING: | | 0.35 to 0.40mm (0.014 to 0.016 in.) |
FLYWHEEL/COIL AIR GAP: | | |
SPARK PLUG TYPE: | | Bosch WSR56F |
SPARK PLUG GAP: | | 0.51mm (0.020 in.) |
CRANKSHAFT MAIN BEARINGS: | | Ball |
FUEL TANK CAPACITY: | | |
FUEL OIL RATIO: | | 40:1 with Stihl oil |
RECOMMENDED FUEL OCTANE: | | Regular |
MIX OIL SPECIFICATION: | | Stihl two-cycle chain saw mix oil |
CHAIN PITCH: | | 3/8 in., 0.050 gauge |
CHAIN TYPE: | | Stihl |
BAR MOUNT PATTERN: | | 31 link |
SHORTEST GUIDE BAR SUPPLIED: | | 33cm (13 in.) |
LONGEST GUIDE BAR SUPPLIED: | | 63cm (25 in.) |
COLOUR SCHEME: | | |
PAINT CODES: | | |
ILLUSTRATED PARTS LIST: | | |
SERVICE MANUAL: | | |