MANUFACTURED BY: |  | Poulan PRO |
 | | NASHVILLE, ARKANSAS U.S.A. |
SERIES OR ASSEMBLY NUMBER: | | |
SERIAL NUMBER PREFIX: | | |
YEAR INTRODUCED: | | 1987 |
YEAR DISCONTINUED: | | |
ENGINE DISPLACEMENT: | | 2.4 cu. in. (38 cc) |
NUMBER OF CYLINDERS: | | 1 |
CYLINDER BORE: | | |
PISTON STROKE: | | 1.260 in. (32.5 mm) |
PISTON RING THICKNESS: | | |
CYLINDER TYPE: | | Aluminum with chrome plated bore |
INTAKE METHOD: | | Piston ported |
MANUFACTURER ADVERTISED H.P.: | | not advertised |
WEIGHT: | | 10.6 lbs. (4.8 Kg) powerhead only |
OPERATOR CONFIGURATION: | | One Man operation |
HANDLEBAR SYSTEM: | | Anti-vibration, 3 point with steel springs |
CHAIN BRAKE: | | Inertia activated |
CLUTCH: | | Centrifugal |
DRIVE TYPE: | | Direct |
CONSTRUCTION: | | Die cast magnseium, injection molded polymer |
MAGNETO TYPE: | | Electronic, Phelon |
CARBURETOR: | | Walbro WT-79 |
MAJOR REPAIR KIT: | | K10-WAT |
MINOR REPAIR KIT: | | D10-WAt |
AIR FILTER SYSTEM: | | Cellulose fiber element (Feutron) |
STARTER TYPE: | | Automatic rewind |
OIL PUMP: | | Automatic, gear driven |
MAXIMUM ENGINE RPM: | | 8,000, (12,000 no load) |
IDLE RPM: | | |
IGNITION TIMING: | | fixed |
BREAKER POINT SETTING: | | none |
FLYWHEEL/COIL AIR GAP: | | 0.012 in. (0.3 mm) |
SPARK PLUG TYPE: | | Champion RCJ-7Y or KCJ7Y |
SPARK PLUG GAP: | | 0.025 in. (0.63 mm) |
CRANKSHAFT MAIN BEARINGS: | | Caged needle roller |
FUEL TANK CAPACITY: | | 10.6 fl. oz. (300 ml) |
FUEL OIL RATIO: | | 50:1 |
RECOMMENDED FUEL OCTANE: | | Regular |
MIX OIL SPECIFICATION: | | Poulan PRO chain saw mix oil |
CHAIN PITCH: | | .325 in. |
CHAIN TYPE: | | Oregon 34SL |
BAR MOUNT PATTERN: | | 02 link |
SHORTEST GUIDE BAR SUPPLIED: | | 13 in. (33 cm) |
LONGEST GUIDE BAR SUPPLIED: | | 16 in. (40 cm) |
COLOUR SCHEME: | | Poulan PRO Yellow |
PAINT CODES: | | |
ILLUSTRATED PARTS LIST: | | |
SERVICE MANUAL: | | |