MANUFACTURED BY: |  | HUSQVARNA VAPENFABRIKS AB |
 | | HUSKVARNA, SWEDEN |
SERIES OR ASSEMBLY NUMBER: | | 966-6481-82 |
SERIAL NUMBER PREFIX: | | |
YEAR INTRODUCED: | | 2013 |
YEAR DISCONTINUED: | | |
ENGINE DISPLACEMENT: | | 50.1 ccm (3.06 cu. in.) |
NUMBER OF CYLINDERS: | | 1 |
CYLINDER BORE: | | 43 mm |
PISTON STROKE: | | 34.5 mm |
PISTON RING THICKNESS: | | 1 mm |
CYLINDER TYPE: | | Aluminum with Chrome plated bore |
INTAKE METHOD: | | Piston Ported |
MANUFACTURER ADVERTISED H.P.: | | 3.7 hp |
WEIGHT: | | 10.8 lbs. powerhead only |
OPERATOR CONFIGURATION: | | One Man operation |
HANDLEBAR SYSTEM: | | Anti-Vibration |
CHAIN BRAKE: | | Inertia Activated |
CLUTCH: | | Centrifugal, 3 shoe |
DRIVE TYPE: | | Direct |
CONSTRUCTION: | | Die cast Magnesium, injecton molded Polymer |
MAGNETO TYPE: | | Electrolux Electronic |
CARBURETOR: | | |
MAJOR REPAIR KIT: | | |
MINOR REPAIR KIT: | | |
AIR FILTER SYSTEM: | | Nylon mesh cartridge |
STARTER TYPE: | | Husqvarna automatic rewind |
OIL PUMP: | | Automatic, gear drived adjustable |
MAXIMUM ENGINE RPM: | | 10,200 free with bar and chain installed |
IDLE RPM: | | 2,700 |
IGNITION TIMING: | | fixed |
BREAKER POINT SETTING: | | none |
FLYWHEEL/COIL AIR GAP: | | |
SPARK PLUG TYPE: | | NGK CMR6H |
SPARK PLUG GAP: | | 0.02 in. (0.5 mm) |
CRANKSHAFT MAIN BEARINGS: | | Ball (2) |
FUEL TANK CAPACITY: | | 17.58 fl. oz. |
FUEL OIL RATIO: | | 50:1 |
RECOMMENDED FUEL OCTANE: | | |
MIX OIL SPECIFICATION: | | |
CHAIN PITCH: | | .325 in. |
CHAIN TYPE: | | Oregon 21 |
BAR MOUNT PATTERN: | | 01 link |
SHORTEST GUIDE BAR SUPPLIED: | | 14 in. (35 cm) |
LONGEST GUIDE BAR SUPPLIED: | | 20 in. (50 cm) |
COLOUR SCHEME: | | |
PAINT CODES: | | |
ILLUSTRATED PARTS LIST: | | |
SERVICE MANUAL: | | |