MANUFACTURED BY: |  | STIHL ANDREAS MASCHINENFABRIK |
 | | STUTTGART, GERMANY |
SERIES OR ASSEMBLY NUMBER: | | 1106 |
SERIAL NUMBER PREFIX: | | |
YEAR INTRODUCED: | | 1969 |
YEAR DISCONTINUED: | | |
ENGINE DISPLACEMENT: | | 106ccm (6.47 cu. in.) |
NUMBER OF CYLINDERS: | | 1 |
CYLINDER BORE: | | 58mm (2.32 in.) |
PISTON STROKE: | | 40mm (1.6 in.) |
PISTON RING THICKNESS: | | 1.5 mm, 2 rings used |
CYLINDER TYPE: | | Aluminum with chrome plated bore |
INTAKE METHOD: | | Piston ported |
MANUFACTURER ADVERTISED H.P.: | | |
WEIGHT: | | 15kg with 63cm bar & chain
33 lbs. with 25 in. bar & chain |
OPERATOR CONFIGURATION: | | One Man operation |
HANDLEBAR SYSTEM: | | Anti-vibration |
CHAIN BRAKE: | | none |
CLUTCH: | | Centrifugal |
DRIVE TYPE: | | Gear Reduction 2:1 ratio |
CONSTRUCTION: | | Die cast mangesium |
MAGNETO TYPE: | | Bosch |
CARBURETOR: | | Tillotson HL-244A series |
MAJOR REPAIR KIT: | | RK-113HL |
MINOR REPAIR KIT: | | DG-5HL |
AIR FILTER SYSTEM: | | Flocked wire screen element |
STARTER TYPE: | | Stihl automatic rewind |
OIL PUMP: | | Automatic with manual assist |
MAXIMUM ENGINE RPM: | | 6,500 |
IDLE RPM: | | |
IGNITION TIMING: | | 3mm (0.12 in.) before TDC |
BREAKER POINT SETTING: | | 0.4 mm (0.016 in.) |
FLYWHEEL/COIL AIR GAP: | | Position if fixed |
SPARK PLUG TYPE: | | Bosch WSR6F |
SPARK PLUG GAP: | | 0.5mm (0.020 in.) |
CRANKSHAFT MAIN BEARINGS: | | needle roller |
FUEL TANK CAPACITY: | | 1.2 litres |
FUEL OIL RATIO: | | 25:1 |
RECOMMENDED FUEL OCTANE: | | Regular |
MIX OIL SPECIFICATION: | | Stihl two-cycle chain saw mix oil |
CHAIN PITCH: | | 1/2 in. optional .404 in. |
CHAIN TYPE: | | Stihl |
BAR MOUNT PATTERN: | | |
SHORTEST GUIDE BAR SUPPLIED: | | 63cm (25 in.) |
LONGEST GUIDE BAR SUPPLIED: | | 150cm (60 in.) |
COLOUR SCHEME: | | |
PAINT CODES: | | |
ILLUSTRATED PARTS LIST: | | |
SERVICE MANUAL: | | |