MANUFACTURED BY: |  | PM (Power Machinery Ltd.) |
 | | VANCOUVER, BRITISH COLUMBIA, CANADA |
SERIES OR ASSEMBLY NUMBER: | | |
SERIAL NUMBER PREFIX: | | |
YEAR INTRODUCED: | | 1946 |
YEAR DISCONTINUED: | | |
ENGINE DISPLACEMENT: | | |
NUMBER OF CYLINDERS: | | 1 |
CYLINDER BORE: | | 1.875 in. (47.6mm) |
PISTON STROKE: | | 1.75 in. (44mm) |
PISTON RING THICKNESS: | | |
CYLINDER TYPE: | | Cast nickel grey iron |
INTAKE METHOD: | | Reed valve |
MANUFACTURER ADVERTISED H.P.: | | not advertised |
WEIGHT: | | 36 lbs. with 20 in. bar |
OPERATOR CONFIGURATION: | | One man operation |
HANDLEBAR SYSTEM: | | Rigid |
CHAIN BRAKE: | | none |
CLUTCH: | | Manual |
DRIVE TYPE: | | Roller drive chain reduction |
CONSTRUCTION: | | Sand cast magnesium |
MAGNETO TYPE: | | Wico model FWS18 |
CARBURETOR: | | Tillotson AJ-13B float type |
MAJOR REPAIR KIT: | | nla |
MINOR REPAIR KIT: | | nla |
AIR FILTER SYSTEM: | | Brass screen |
STARTER TYPE: | | Rope |
OIL PUMP: | | Manual pump |
MAXIMUM ENGINE RPM: | | 3,800 |
IDLE RPM: | | |
IGNITION TIMING: | | |
BREAKER POINT SETTING: | | .018 in to .020 in. |
FLYWHEEL/COIL AIR GAP: | | Position is fixed |
SPARK PLUG TYPE: | | Champion J-8 (PM # 10252) |
SPARK PLUG GAP: | | .025 in. |
CRANKSHAFT MAIN BEARINGS: | | Ball type |
FUEL TANK CAPACITY: | | 40 oz. (1.18 litres) |
FUEL OIL RATIO: | | 1 pint to 1 gallon Imperial measure |
RECOMMENDED FUEL OCTANE: | | regular grade |
MIX OIL SPECIFICATION: | | SAE 50 |
CHAIN PITCH: | | 9/16 in. |
CHAIN TYPE: | | PM No. 3 standard chain |
BAR MOUNT PATTERN: | | |
SHORTEST GUIDE BAR SUPPLIED: | | 14 in. (35.5cm) |
LONGEST GUIDE BAR SUPPLIED: | | 26 in. (66cm) |
COLOUR SCHEME: | | Aluminum not painted |
PAINT CODES: | | |
ILLUSTRATED PARTS LIST: | | |
SERVICE MANUAL: | | |