MANUFACTURED BY: |  | STIHL ANDREAS MASCHINENFABRIK |
 | | STUTTGART, GERMANY |
SERIES OR ASSEMBLY NUMBER: | | 1116 |
SERIAL NUMBER PREFIX: | | |
YEAR INTRODUCED: | | 1973 |
YEAR DISCONTINUED: | | 1983 |
ENGINE DISPLACEMENT: | | 32ccm (1.95 cu. in.) |
NUMBER OF CYLINDERS: | | 1 |
CYLINDER BORE: | | 38mm (1.52 in.) |
PISTON STROKE: | | 28mm (1.12 in.) |
PISTON RING THICKNESS: | | 1.5 mm, 1 ring used |
CYLINDER TYPE: | | Aluminum with Chrome plated bore |
INTAKE METHOD: | | Piston ported |
MANUFACTURER ADVERTISED H.P.: | | 1.8 DIN @ 8,500 rpm |
WEIGHT: | | 5.2 kg (11.5 lbs.) with 12 in B&C (30cm) |
OPERATOR CONFIGURATION: | | One Man operation, Top Handle type saw |
HANDLEBAR SYSTEM: | | Rigid |
CHAIN BRAKE: | | none |
CLUTCH: | | Centrifugal |
DRIVE TYPE: | | Direct |
CONSTRUCTION: | | Die cast Magnesium |
MAGNETO TYPE: | | Electronic |
CARBURETOR: | | Walbro HDC 17 |
MAJOR REPAIR KIT: | | K10-HDC |
MINOR REPAIR KIT: | | D10-HDC |
AIR FILTER SYSTEM: | | Felt pad |
STARTER TYPE: | | Stihl automatic rewind, 3.5 mm cord |
OIL PUMP: | | Automatic |
MAXIMUM ENGINE RPM: | | 12,500 |
IDLE RPM: | | 2,800 |
IGNITION TIMING: | | 2.2mm (0.88 in.) before TDC |
BREAKER POINT SETTING: | | none |
FLYWHEEL/COIL AIR GAP: | | Position is fixed |
SPARK PLUG TYPE: | | Bosch WSR6F |
SPARK PLUG GAP: | | 0.5mm (0.020 in.) |
CRANKSHAFT MAIN BEARINGS: | | Caged needle roller |
FUEL TANK CAPACITY: | | 330ml |
FUEL OIL RATIO: | | 25:1 |
RECOMMENDED FUEL OCTANE: | | Regular |
MIX OIL SPECIFICATION: | | Stihl two-cycle chain saw mix oil |
CHAIN PITCH: | | 6.35mm (1/4 in.) |
CHAIN TYPE: | | Stihl |
BAR MOUNT PATTERN: | | |
SHORTEST GUIDE BAR SUPPLIED: | | 25cm (10 in.) |
LONGEST GUIDE BAR SUPPLIED: | | 30cm (12 in.) |
COLOUR SCHEME: | | Grey with Orange clutch cover |
PAINT CODES: | | |
ILLUSTRATED PARTS LIST: | | |
SERVICE MANUAL: | | |