MANUFACTURED BY: |  | PIONEER SAWS LTD. |
 | | PETERBOROUGH, ONTARIO, CANADA |
SERIES OR ASSEMBLY NUMBER: | | |
SERIAL NUMBER PREFIX: | | |
YEAR INTRODUCED: | | 1981 |
YEAR DISCONTINUED: | | 1982 |
ENGINE DISPLACEMENT: | | 3.14 cu. in. (51.4cc) |
NUMBER OF CYLINDERS: | | 1 |
CYLINDER BORE: | | 1.625 in. (41.27mm) |
PISTON STROKE: | | 1.50 in. (38.1mm) |
PISTON RING THICKNESS: | | |
CYLINDER TYPE: | | Chrome plated aluminum |
INTAKE METHOD: | | Piston ported |
MANUFACTURER ADVERTISED H.P.: | | not advertised |
WEIGHT: | | |
OPERATOR CONFIGURATION: | | One Man operation |
HANDLEBAR SYSTEM: | | Anti-vibration |
CHAIN BRAKE: | | Mechanical |
CLUTCH: | | Centrifugal |
DRIVE TYPE: | | Direct |
CONSTRUCTION: | | Die cast magnesium |
MAGNETO TYPE: | | Phelon Electronic |
CARBURETOR: | | Tillotson HU-15E series |
MAJOR REPAIR KIT: | | RK-14HU |
MINOR REPAIR KIT: | | DG-2HU |
AIR FILTER SYSTEM: | | Flocked screen |
STARTER TYPE: | | Easy Arc system with compression release |
OIL PUMP: | | Automatic |
MAXIMUM ENGINE RPM: | | 7,500 |
IDLE RPM: | | |
IGNITION TIMING: | | fixed |
BREAKER POINT SETTING: | | none |
FLYWHEEL/COIL AIR GAP: | | position is fixed |
SPARK PLUG TYPE: | | Champion RCJ8 |
SPARK PLUG GAP: | | 0.030 in. (0.63mm) |
CRANKSHAFT MAIN BEARINGS: | | Ball |
FUEL TANK CAPACITY: | | 12 fl. oz. (350 ml) |
FUEL OIL RATIO: | | 40:1 |
RECOMMENDED FUEL OCTANE: | | Regular |
MIX OIL SPECIFICATION: | | Two-cycle chain saw mix oil |
CHAIN PITCH: | | .325 in. |
CHAIN TYPE: | | Pioneer |
BAR MOUNT PATTERN: | | 01 link |
SHORTEST GUIDE BAR SUPPLIED: | | 14 in. (35cm) |
LONGEST GUIDE BAR SUPPLIED: | | |
COLOUR SCHEME: | | |
PAINT CODES: | | |
ILLUSTRATED PARTS LIST: | | |
SERVICE MANUAL: | | |