MANUFACTURED BY: |  | PIONEER SAWS LTD. |
 | | PETERBOROUGH, ONTARIO, CANADA |
SERIES OR ASSEMBLY NUMBER: | | |
SERIAL NUMBER PREFIX: | | |
YEAR INTRODUCED: | | 1983 |
YEAR DISCONTINUED: | | |
ENGINE DISPLACEMENT: | | 5.0 cu. in. (82 ccm) |
NUMBER OF CYLINDERS: | | 1 |
CYLINDER BORE: | | 2.062 in. (52.4 mm) |
PISTON STROKE: | | 1.50 in. (38.1 mm) |
PISTON RING THICKNESS: | | 2 rings used |
CYLINDER TYPE: | | Aluminum with Chrome plated bore |
INTAKE METHOD: | | Reed valve |
MANUFACTURER ADVERTISED H.P.: | | not advertised |
WEIGHT: | | 21.9 lbs. (9.9 kg) with 16 in. (40 cm) bar and chain |
OPERATOR CONFIGURATION: | | One Man operation |
HANDLEBAR SYSTEM: | | Anti-vibration |
CHAIN BRAKE: | | Mechanical |
CLUTCH: | | Centrifugal |
DRIVE TYPE: | | Direct |
CONSTRUCTION: | | Die cast Magnesium |
MAGNETO TYPE: | | Phelon electronic |
CARBURETOR: | | Walbro SDC-53D |
MAJOR REPAIR KIT: | | K10-SDC |
MINOR REPAIR KIT: | | D10-SDC |
AIR FILTER SYSTEM: | | Cellulose fiber element |
STARTER TYPE: | | Pioneer automatic rewind, pawl type |
OIL PUMP: | | Automatic, gear driven, adjustable |
MAXIMUM ENGINE RPM: | | 9,600 under load |
IDLE RPM: | | where clutch disengages |
IGNITION TIMING: | | fixed |
BREAKER POINT SETTING: | | none |
FLYWHEEL/COIL AIR GAP: | | 0.012 in. (0.30 mm) |
SPARK PLUG TYPE: | | Champion RCJ7Y |
SPARK PLUG GAP: | | 0.025 in. (0.63 mm) |
CRANKSHAFT MAIN BEARINGS: | | Ball |
FUEL TANK CAPACITY: | | 33 fl. oz. (940 ml) |
FUEL OIL RATIO: | | 40:1 |
RECOMMENDED FUEL OCTANE: | | Regular |
MIX OIL SPECIFICATION: | | Pioneer Chain Saw mix oil |
CHAIN PITCH: | | 3/8 in. |
CHAIN TYPE: | | Pioneer |
BAR MOUNT PATTERN: | | 20 link |
SHORTEST GUIDE BAR SUPPLIED: | | 16 in. (40 cm) |
LONGEST GUIDE BAR SUPPLIED: | | 36 in. (91 cm) |
COLOUR SCHEME: | | Pioneer pale Yellow with dark Green |
PAINT CODES: | | |
ILLUSTRATED PARTS LIST: | | |
SERVICE MANUAL: | | |