MANUFACTURED BY: |  | WRIGHT BLADE SAWS |
 | | LOUISVILLE, KY U.S.A,
SHEBOYGIN, WI |
SERIES OR ASSEMBLY NUMBER: | | |
SERIAL NUMBER PREFIX: | | |
YEAR INTRODUCED: | | 1963 |
YEAR DISCONTINUED: | | |
ENGINE DISPLACEMENT: | | 7.06 cu. in. (115.7 cc) |
NUMBER OF CYLINDERS: | | 1 |
CYLINDER BORE: | | 2.50 in. (63.5 mm) |
PISTON STROKE: | | 1.4375 in. (36.5 mm) |
PISTON RING THICKNESS: | | |
CYLINDER TYPE: | | Aluminum with cast iron sleeve |
INTAKE METHOD: | | Reed valves |
MANUFACTURER ADVERTISED H.P.: | | not advertised |
WEIGHT: | | 25 lbs. (11.3 kg) complete |
OPERATOR CONFIGURATION: | | One Man operation |
HANDLEBAR SYSTEM: | | Rigid |
CHAIN BRAKE: | | none |
CLUTCH: | | none |
DRIVE TYPE: | | Direct |
CONSTRUCTION: | | Die cast magnesium |
MAGNETO TYPE: | | Phelon flywheel magneto |
CARBURETOR: | | Carter ND series |
MAJOR REPAIR KIT: | | n/a |
MINOR REPAIR KIT: | | n/a |
AIR FILTER SYSTEM: | | Skinner ribbon element |
STARTER TYPE: | | Fairbanks Morse automatic rewind |
OIL PUMP: | | none |
MAXIMUM ENGINE RPM: | | 4800 to 5200 with governor |
IDLE RPM: | | |
IGNITION TIMING: | | fixed |
BREAKER POINT SETTING: | | 0.020 in. (0.51 mm) |
FLYWHEEL/COIL AIR GAP: | | Position is fixed |
SPARK PLUG TYPE: | | Champion J11J |
SPARK PLUG GAP: | | 0.025 in. (0.63 mm) |
CRANKSHAFT MAIN BEARINGS: | | Ball |
FUEL TANK CAPACITY: | | 64 fl. oz. (1.9 litres) |
FUEL OIL RATIO: | | 1/2 pint to 1 gallon = 16:1 |
RECOMMENDED FUEL OCTANE: | | Regular grade unleaded |
MIX OIL SPECIFICATION: | | Wright 2-cycle mix oil |
CHAIN PITCH: | | none |
CHAIN TYPE: | | none |
BAR MOUNT PATTERN: | | |
SHORTEST GUIDE BAR SUPPLIED: | | |
LONGEST GUIDE BAR SUPPLIED: | | 20 in. (50 cm) |
COLOUR SCHEME: | | |
PAINT CODES: | | |
ILLUSTRATED PARTS LIST: | | |
SERVICE MANUAL: | | |