Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host


Model: CP
MANUFACTURED BY:
DOLMAR Maschinen-Fabrik GmbH & Co.
HAMBURG, GERMANY
SERIES OR ASSEMBLY NUMBER:
102
SERIAL NUMBER PREFIX:
YEAR INTRODUCED:
1953
YEAR DISCONTINUED:
1961
ENGINE DISPLACEMENT:
102 cc (6.22 cu. in.)
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
PISTON STROKE:
PISTON RING THICKNESS:
CYLINDER TYPE:
INTAKE METHOD:
MANUFACTURER ADVERTISED H.P.:
6 hp SAE, 4 DIN
WEIGHT:
14 kg. (31 lbs.)
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
CHAIN BRAKE:
CLUTCH:
DRIVE TYPE:
CONSTRUCTION:
MAGNETO TYPE:
Bosch
CARBURETOR:
Bing
MAJOR REPAIR KIT:
MINOR REPAIR KIT:
AIR FILTER SYSTEM:
STARTER TYPE:
OIL PUMP:
MAXIMUM ENGINE RPM:
IDLE RPM:
IGNITION TIMING:
BREAKER POINT SETTING:
FLYWHEEL/COIL AIR GAP:
SPARK PLUG TYPE:
SPARK PLUG GAP:
CRANKSHAFT MAIN BEARINGS:
FUEL TANK CAPACITY:
FUEL OIL RATIO:
RECOMMENDED FUEL OCTANE:
MIX OIL SPECIFICATION:
CHAIN PITCH:
CHAIN TYPE:
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED:
LONGEST GUIDE BAR SUPPLIED:
COLOUR SCHEME:
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:
COMMENTS:
RESTORED CP COURTESY MARCO SCHUILING COLLECTION
Very rare two man version of model CP, Photographs courtesy MARCO SCHULING COLLECTION
Colour photographs courtesy George Blake collection
The starter utilized a length of roller chain instead of steel cable or nylon rope
 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2024 MIKE ACRES - All rights are reserved.