MANUFACTURED BY: |  | JONSEREDS FABRIKERS AB |
 | | PARTILLE, SWEDEN |
SERIES OR ASSEMBLY NUMBER: | | |
SERIAL NUMBER PREFIX: | | |
YEAR INTRODUCED: | | 1963 |
YEAR DISCONTINUED: | | 1968 |
ENGINE DISPLACEMENT: | | 85ccm (5.18 cu. in.) |
NUMBER OF CYLINDERS: | | 1 |
CYLINDER BORE: | | 52mm (2.04 in.) |
PISTON STROKE: | | 40mm (1.57 in.) |
PISTON RING THICKNESS: | | |
CYLINDER TYPE: | | Aluminum with chrome plated bore |
INTAKE METHOD: | | Reed valves and thrid port |
MANUFACTURER ADVERTISED H.P.: | | 2.7kw @ 6050 rpm |
WEIGHT: | | 7.85kg (17.3 lbs.) |
OPERATOR CONFIGURATION: | | One Man operation |
HANDLEBAR SYSTEM: | | Rigid |
CHAIN BRAKE: | | none |
CLUTCH: | | Centrifugal |
DRIVE TYPE: | | Direct |
CONSTRUCTION: | | Die cast magnesium |
MAGNETO TYPE: | | Pagani |
CARBURETOR: | | Tillotson HL series |
MAJOR REPAIR KIT: | | |
MINOR REPAIR KIT: | | |
AIR FILTER SYSTEM: | | Fabric mesh |
STARTER TYPE: | | Jonsereds Automatic rewind |
OIL PUMP: | | Manual |
MAXIMUM ENGINE RPM: | | 8,100 |
IDLE RPM: | | |
IGNITION TIMING: | | 2.8mm to 3.6mm before TDC |
BREAKER POINT SETTING: | | 0.35mm to 0.40mm (0.014 in. to 0.015 in.) |
FLYWHEEL/COIL AIR GAP: | | |
SPARK PLUG TYPE: | | |
SPARK PLUG GAP: | | 0.50mm to 0.60mm (0.020 in. to 0.024 in.) |
CRANKSHAFT MAIN BEARINGS: | | Ball |
FUEL TANK CAPACITY: | | 1.20 litres (40.5 oz.) |
FUEL OIL RATIO: | | |
RECOMMENDED FUEL OCTANE: | | Regular |
MIX OIL SPECIFICATION: | | |
CHAIN PITCH: | | .404 in. |
CHAIN TYPE: | | |
BAR MOUNT PATTERN: | | |
SHORTEST GUIDE BAR SUPPLIED: | | |
LONGEST GUIDE BAR SUPPLIED: | | |
COLOUR SCHEME: | | Red and Silver enamel |
PAINT CODES: | | |
ILLUSTRATED PARTS LIST: | | |
SERVICE MANUAL: | | |