MANUFACTURED BY: |  | HOMELITE-TEXTRON |
 | | PORT CHESTER, NEW YORK, USA |
SERIES OR ASSEMBLY NUMBER: | | EZ series, ZIP-6, ZIP-6-MODIFIED |
SERIAL NUMBER PREFIX: | | |
YEAR INTRODUCED: | | 1960 |
YEAR DISCONTINUED: | | 1961 |
ENGINE DISPLACEMENT: | | 5.64 cu. in. (82 ccm) |
NUMBER OF CYLINDERS: | | Homelite Two-Cycle single cylinder loop scavenged engine |
CYLINDER BORE: | | 52.5 mm |
PISTON STROKE: | | 38 mm |
PISTON RING THICKNESS: | | 0.0625 in. pn 56291 |
CYLINDER TYPE: | | Aluminum with Chrome plated bore |
INTAKE METHOD: | | Reed valve |
MANUFACTURER ADVERTISED H.P.: | | (5 hk) |
WEIGHT: | | 18 lbs. powerhead only |
OPERATOR CONFIGURATION: | | One Man operation |
HANDLEBAR SYSTEM: | | Rigid |
CHAIN BRAKE: | | none |
CLUTCH: | | Centrifugal |
DRIVE TYPE: | | Direct |
CONSTRUCTION: | | Die cast Magnesium |
MAGNETO TYPE: | | Phelon |
CARBURETOR: | | Tillotson HL-104A series |
MAJOR REPAIR KIT: | | RK-88HL |
MINOR REPAIR KIT: | | DG-5HL |
AIR FILTER SYSTEM: | | Wix element |
STARTER TYPE: | | Fairbanks Morse automatic rewind |
OIL PUMP: | | Manual |
MAXIMUM ENGINE RPM: | | 6,000 |
IDLE RPM: | | |
IGNITION TIMING: | | fixed |
BREAKER POINT SETTING: | | 0.015 in. (0.38 mm) |
FLYWHEEL/COIL AIR GAP: | | Fixed positioon |
SPARK PLUG TYPE: | | Champion J6 |
SPARK PLUG GAP: | | 0.025 in. (0.63 mm) |
CRANKSHAFT MAIN BEARINGS: | | Ball and caged needle roller |
FUEL TANK CAPACITY: | | 45 oz. (1.33 litres) |
FUEL OIL RATIO: | | 1/2 pint to 1 gallon with Homelite chain saw mix oil |
RECOMMENDED FUEL OCTANE: | | Regular |
MIX OIL SPECIFICATION: | | Homelite chain saw mix oil |
CHAIN PITCH: | | 7/16 in. |
CHAIN TYPE: | | Oregon 62C |
BAR MOUNT PATTERN: | | |
SHORTEST GUIDE BAR SUPPLIED: | | 12 in. (30 cm) |
LONGEST GUIDE BAR SUPPLIED: | | 30 in. (76 cm) |
COLOUR SCHEME: | | Homelite Red metallic enamel |
PAINT CODES: | | |
ILLUSTRATED PARTS LIST: | | |
SERVICE MANUAL: | | |