Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: 111 Super

MANUFACTURED BY:
JONSEREDS FABRIKERS AB
PARTILLE, SWEDEN
SERIES OR ASSEMBLY NUMBER:
YEAR INTRODUCED:
1973
YEAR DISCONTINUED:
1980
ENGINE DISPLACEMENT:
110cc
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
56mm
PISTON STROKE:
45mm
PISTON RING THICKNESS:
CYLINDER TYPE:
Aluminum with chrome plated bore
INTAKE METHOD:
Piston ported
MANUFACTURER ADVERTISED H.P.:
4.8kW @ 7600 rpm
WEIGHT:
9.2 kg (20-1/4 lbs.) powerhead only
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
Rigid
CHAIN BRAKE:
none
CLUTCH:
Centrifugal
DRIVE TYPE:
Direct
CONSTRUCTION:
Die cast magnesium
MAGNETO TYPE:
Pagani
CARBURETOR:
Tillotson HS-112 series
MAJOR REPAIR KIT:
RK-23HS
MINOR REPAIR KIT:
DG-5HS/T
AIR FILTER SYSTEM:
Nylon mesh cartridge
STARTER TYPE:
Jonsereds automatic rewind
OIL PUMP:
Automatic, worm gear driven
MAXIMUM ENGINE RPM:
10,100
IDLE RPM:
IGNITION TIMING:
3.8mm before TDC
BREAKER POINT SETTING:
0.3 to 0.4mm
FLYWHEEL/COIL AIR GAP:
0.3 mm (0.012 in.)
SPARK PLUG TYPE:
Bosch WS7F
SPARK PLUG GAP:
0.5mm (0.020 in.)
CRANKSHAFT MAIN BEARINGS:
Ball
FUEL TANK CAPACITY:
1.2 litres
FUEL OIL RATIO:
25:1
RECOMMENDED FUEL OCTANE:
Regular
MIX OIL SPECIFICATION:
Two-cycle chain saw mix oil
CHAIN PITCH:
.404 in.
CHAIN TYPE:
Chipper
BAR MOUNT PATTERN:
18 link
SHORTEST GUIDE BAR SUPPLIED:
58cm (23 in.)
LONGEST GUIDE BAR SUPPLIED:
89cm (35 in.)
COLOUR SCHEME:
Red and Silver enamel
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:

Photographs courtesy George Blake collection

 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2021 MIKE ACRES - All rights are reserved.