Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: 5200

MANUFACTURED BY:
TITAN (PROPULSION ENGINE CORP)
SOUTH MILWAUKEE, WISCONSIN
SERIES OR ASSEMBLY NUMBER:
TITAN 5200
SERIAL NUMBER PREFIX:
YEAR INTRODUCED:
1957
YEAR DISCONTINUED:
ENGINE DISPLACEMENT:
6.4 cu. in. (105cc)
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
PISTON STROKE:
PISTON RING THICKNESS:
CYLINDER TYPE:
INTAKE METHOD:
MANUFACTURER ADVERTISED H.P.:
WEIGHT:
24 lbs. powerhead only
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
CHAIN BRAKE:
CLUTCH:
Fairbanks Morse Centrifugal
DRIVE TYPE:
Gear reduction, STANDARD SPEED GEAR SET 1.65:1
CONSTRUCTION:
MAGNETO TYPE:
CARBURETOR:
MAJOR REPAIR KIT:
MINOR REPAIR KIT:
AIR FILTER SYSTEM:
STARTER TYPE:
OIL PUMP:
MAXIMUM ENGINE RPM:
IDLE RPM:
IGNITION TIMING:
BREAKER POINT SETTING:
FLYWHEEL/COIL AIR GAP:
SPARK PLUG TYPE:
SPARK PLUG GAP:
CRANKSHAFT MAIN BEARINGS:
FUEL TANK CAPACITY:
FUEL OIL RATIO:
RECOMMENDED FUEL OCTANE:
MIX OIL SPECIFICATION:
CHAIN PITCH:
1/2 in., optional 9/16 in.
CHAIN TYPE:
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED:
LONGEST GUIDE BAR SUPPLIED:
COLOUR SCHEME:
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:
Used West Bend 2735 engine



 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2024 MIKE ACRES - All rights are reserved.