MANUFACTURED BY: |  | HOMELITE-TEXTRON |
 | | PORT CHESTER, NEW YORK, USA |
SERIES OR ASSEMBLY NUMBER: | | |
SERIAL NUMBER PREFIX: | | |
YEAR INTRODUCED: | | |
YEAR DISCONTINUED: | | 1972 |
ENGINE DISPLACEMENT: | | 4.0 cu. in. (65.5 ccm) |
NUMBER OF CYLINDERS: | | 1 |
CYLINDER BORE: | | 1.875 in. 47.6 mm) |
PISTON STROKE: | | 1.4375 in. 36.5 mm) |
PISTON RING THICKNESS: | | 0.0625 in. pn 68068 |
CYLINDER TYPE: | | Aluminum with Chrome plated bore |
INTAKE METHOD: | | 4 reed pyramid type |
MANUFACTURER ADVERTISED H.P.: | | not advertised |
WEIGHT: | | |
OPERATOR CONFIGURATION: | | One man operation |
HANDLEBAR SYSTEM: | | Rigid |
CHAIN BRAKE: | | none |
CLUTCH: | | Centrifugal |
DRIVE TYPE: | | Direct |
CONSTRUCTION: | | Die cast Magnesium |
MAGNETO TYPE: | | Phelon or Wico flywheel type |
CARBURETOR: | | Tillotson HS
Walbro SDC |
MAJOR REPAIR KIT: | | Walbro K10-SDC
Tillotson RK-23HS |
MINOR REPAIR KIT: | | Walbro D10-SDC
Tillotson DG-5HS/T |
AIR FILTER SYSTEM: | | Cellulose fiber element |
STARTER TYPE: | | Automatic rewind |
OIL PUMP: | | Automatic with manual override |
MAXIMUM ENGINE RPM: | | |
IDLE RPM: | | |
IGNITION TIMING: | | 30 degrees before TDC
Position stator plate fully clockwise |
BREAKER POINT SETTING: | | 0.015 in. (0.38 mm) |
FLYWHEEL/COIL AIR GAP: | | Position is fixed |
SPARK PLUG TYPE: | | Champion CJ-6 |
SPARK PLUG GAP: | | 0.025 in. (0.63 mm) |
CRANKSHAFT MAIN BEARINGS: | | Caged needle roller |
FUEL TANK CAPACITY: | | |
FUEL OIL RATIO: | | 32:1 |
RECOMMENDED FUEL OCTANE: | | Regular grade |
MIX OIL SPECIFICATION: | | Homelite Chain Saw mix oil |
CHAIN PITCH: | | 3/8 in. |
CHAIN TYPE: | | Oregon 72D |
BAR MOUNT PATTERN: | | 14 link |
SHORTEST GUIDE BAR SUPPLIED: | | |
LONGEST GUIDE BAR SUPPLIED: | | |
COLOUR SCHEME: | | |
PAINT CODES: | | |
ILLUSTRATED PARTS LIST: | | |
SERVICE MANUAL: | | |