MANUFACTURED BY: |  | PEERLESS POWER EQUIPMENT |
 | | MAQUOKETA, IOWA U.S.A. |
SERIES OR ASSEMBLY NUMBER: | | Peerless |
SERIAL NUMBER PREFIX: | | |
YEAR INTRODUCED: | | 1965 |
YEAR DISCONTINUED: | | |
ENGINE DISPLACEMENT: | | 3.6 cu. in. (59 ccm) |
NUMBER OF CYLINDERS: | | 1 |
CYLINDER BORE: | | 1.81 in. (46 mm) |
PISTON STROKE: | | 1.38 in. (35 mm) |
PISTON RING THICKNESS: | | |
CYLINDER TYPE: | | Aluminum with CHROME plated bore |
INTAKE METHOD: | | Reed valve |
MANUFACTURER ADVERTISED H.P.: | | |
WEIGHT: | | 12.5 lbs. powerhead only |
OPERATOR CONFIGURATION: | | One Man operation |
HANDLEBAR SYSTEM: | | Rigid, ribber grips |
CHAIN BRAKE: | | none |
CLUTCH: | | Centrifugal |
DRIVE TYPE: | | Direct |
CONSTRUCTION: | | Die cast magnesium |
MAGNETO TYPE: | | Phelon |
CARBURETOR: | | Tillotson HS series |
MAJOR REPAIR KIT: | | RK-23HS |
MINOR REPAIR KIT: | | DG-5HS/T |
AIR FILTER SYSTEM: | | Flocked wire screen |
STARTER TYPE: | | Fairbanks Morse automatic rewind |
OIL PUMP: | | Manual |
MAXIMUM ENGINE RPM: | | 7,200 |
IDLE RPM: | | |
IGNITION TIMING: | | 30 degrees before TDC |
BREAKER POINT SETTING: | | 0.015 in. (0.38 mm) |
FLYWHEEL/COIL AIR GAP: | | fixed |
SPARK PLUG TYPE: | | Champion CJ-6 |
SPARK PLUG GAP: | | 0.025 in. (0.63 mm) |
CRANKSHAFT MAIN BEARINGS: | | Caged needle roller |
FUEL TANK CAPACITY: | | 1-1/3 pints |
FUEL OIL RATIO: | | 16:1 |
RECOMMENDED FUEL OCTANE: | | Regular |
MIX OIL SPECIFICATION: | | Two-cycle chain saw mix oil |
CHAIN PITCH: | | .404 in. |
CHAIN TYPE: | | Remington |
BAR MOUNT PATTERN: | | |
SHORTEST GUIDE BAR SUPPLIED: | | 16 in. |
LONGEST GUIDE BAR SUPPLIED: | | 24 in. |
COLOUR SCHEME: | | Blue |
PAINT CODES: | | |
ILLUSTRATED PARTS LIST: | | |
SERVICE MANUAL: | | |