MANUFACTURED BY: |  | HOMELITE-TEXTRON |
 | | PORT CHESTER, NEW YORK, USA |
SERIES OR ASSEMBLY NUMBER: | | 775-G-1, 775-G-A-1 |
SERIAL NUMBER PREFIX: | | |
YEAR INTRODUCED: | | 1964 |
YEAR DISCONTINUED: | | 1965 |
ENGINE DISPLACEMENT: | | 5.8 cu. in. (95 ccm) |
NUMBER OF CYLINDERS: | | Homelite Two-Cycle single cylinder loop scavenged engine |
CYLINDER BORE: | | 2.1875 in. (55.5mm) |
PISTON STROKE: | | 1.546875 in. (39.29mm) |
PISTON RING THICKNESS: | | |
CYLINDER TYPE: | | Aluminum with Chrome plated bore |
INTAKE METHOD: | | Reed valves (4 petal pyramid) |
MANUFACTURER ADVERTISED H.P.: | | not advertised |
WEIGHT: | | 22 lbs. powerhead only |
OPERATOR CONFIGURATION: | | One Man operation |
HANDLEBAR SYSTEM: | | Rigid |
CHAIN BRAKE: | | none |
CLUTCH: | | Centrifugal |
DRIVE TYPE: | | 2 Gear reduction, 2.87:1 ratio |
CONSTRUCTION: | | Die cast Magnesium |
MAGNETO TYPE: | | Phelon flywheel magneto with breaker points |
CARBURETOR: | | Tillotson HL-117C |
MAJOR REPAIR KIT: | | RK-88HL |
MINOR REPAIR KIT: | | DG-5HL |
AIR FILTER SYSTEM: | | Microbon Ribbon element |
STARTER TYPE: | | Fairbanks Mores automatic rewind |
OIL PUMP: | | Manual |
MAXIMUM ENGINE RPM: | | 6,000 under load, no governor |
IDLE RPM: | | |
IGNITION TIMING: | | fixed |
BREAKER POINT SETTING: | | 0.015 in. (0.38mm) |
FLYWHEEL/COIL AIR GAP: | | Position is fixed |
SPARK PLUG TYPE: | | Champion HO-8A (can sub J6 or J6J) |
SPARK PLUG GAP: | | 0.025 in. (0.63mm) |
CRANKSHAFT MAIN BEARINGS: | | Ball and caged needle roller |
FUEL TANK CAPACITY: | | 60 oz. (1.77 litres) |
FUEL OIL RATIO: | | 1/2 pint to 1 gallon with Homelite mix oil |
RECOMMENDED FUEL OCTANE: | | Regular |
MIX OIL SPECIFICATION: | | Homelite chain saw mix oil |
CHAIN PITCH: | | 1/2 in. |
CHAIN TYPE: | | Oregon 10C, 10L or 32C |
BAR MOUNT PATTERN: | | 16 link |
SHORTEST GUIDE BAR SUPPLIED: | | 14 in. (35cm) |
LONGEST GUIDE BAR SUPPLIED: | | 38 in. (96cm) |
COLOUR SCHEME: | | Homelite Red fuel tank, carburetor shield, carburetir guard, pistol grip and gearcase cover. Canyon Green starter cover, cylinder shield and flywheel shroud. |
PAINT CODES: | | |
ILLUSTRATED PARTS LIST: | | |
SERVICE MANUAL: | | |