Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: 3B55

MANUFACTURED BY:
CHOREMASTER (WEBER ENGINEERED PRODUCTS INC.)
CINCINATTI, OH U.S.A.
SERIES OR ASSEMBLY NUMBER:
YEAR INTRODUCED:
1954
YEAR DISCONTINUED:
ENGINE DISPLACEMENT:
4.48 cu. in. (73.4 cc)
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
1.875 in. (47.6 mm)
PISTON STROKE:
1.625 in. (41.27 mm)
CYLINDER TYPE:
Aluminum with cast iron sleeve
INTAKE METHOD:
Reed valves
MANUFACTURER ADVERTISED H.P.:
4.5
WEIGHT:
26-3/4 lbs. powerhead only
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
Rigid
CHAIN BRAKE:
none
CLUTCH:
Centrifugal
DRIVE TYPE:
Gilmer belt reduction, ratio 3:1
CONSTRUCTION:
Die cast aluminum
MAGNETO TYPE:
Phelon or Clinton
CARBURETOR:
Clinton float type, pressurized fuel tank
MAJOR REPAIR KIT:
nla
MINOR REPAIR KIT:
nla
AIR FILTER SYSTEM:
Skinner ribbon element
STARTER TYPE:
Schnacke automatic rewind
OIL PUMP:
Manual
MAXIMUM ENGINE RPM:
4,500 to 4,800
IDLE RPM:
IGNITION TIMING:
35 degrees before TDC
BREAKER POINT SETTING:
0.020 in. (0.51 mm)
FLYWHEEL/COIL AIR GAP:
0.070 to 0.017 in.
SPARK PLUG TYPE:
Champion F8
SPARK PLUG GAP:
0.025 in. (0.63 mm)
CRANKSHAFT MAIN BEARINGS:
Ball
FUEL TANK CAPACITY:
FUEL OIL RATIO:
1/2 pint to 1 gallon
RECOMMENDED FUEL OCTANE:
Regular
MIX OIL SPECIFICATION:
SAE 30
CHAIN PITCH:
1/2 in.
CHAIN TYPE:
Oregon
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED:
14 in. (35 cm)
LONGEST GUIDE BAR SUPPLIED:
30 in. (76 cm)
COLOUR SCHEME:
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:
saw manufactured by Clinton, same as their model 323





 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2014 MIKE ACRES - All rights are reserved.