Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: L

MANUFACTURED BY:
IEL (Industrial Engineering Ltd.)
VANCOUVER, BRITISH COLUMBIA, CANADA
SERIES OR ASSEMBLY NUMBER:
YEAR INTRODUCED:
1944
YEAR DISCONTINUED:
1947
ENGINE DISPLACEMENT:
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
PISTON STROKE:
PISTON RING THICKNESS:
CYLINDER TYPE:
Cast iron
INTAKE METHOD:
Piston ported
MANUFACTURER ADVERTISED H.P.:
8
WEIGHT:
117 lbs.
OPERATOR CONFIGURATION:
Two Man operation
HANDLEBAR SYSTEM:
rigid
CHAIN BRAKE:
none
CLUTCH:
Manual
DRIVE TYPE:
Bevel gear transmission
CONSTRUCTION:
Sand cast aluminum
MAGNETO TYPE:
Eismann
CARBURETOR:
IEL float type
MAJOR REPAIR KIT:
nla
MINOR REPAIR KIT:
nla
AIR FILTER SYSTEM:
Wire screen and shredded metal
STARTER TYPE:
Rope
OIL PUMP:
Manual
MAXIMUM ENGINE RPM:
3200
IDLE RPM:
IGNITION TIMING:
BREAKER POINT SETTING:
FLYWHEEL/COIL AIR GAP:
SPARK PLUG TYPE:
Champion UD16 or 8 Com.
SPARK PLUG GAP:
0.025 in.
CRANKSHAFT MAIN BEARINGS:
Ball
FUEL TANK CAPACITY:
FUEL OIL RATIO:
8:1
RECOMMENDED FUEL OCTANE:
Regular grade
MIX OIL SPECIFICATION:
SAE 50
CHAIN PITCH:
.750 in (19mm)
CHAIN TYPE:
IEL
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED:
LONGEST GUIDE BAR SUPPLIED:
COLOUR SCHEME:
Aluminum castings
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:



Photo of saw in collection of Angelo Trepanier, Quebec Canada
 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2022 MIKE ACRES - All rights are reserved.