MANUFACTURED BY: |  | SOLO KLEINMOTOREN GmbH |
 | | STUTTGART, GERMANY |
SERIES OR ASSEMBLY NUMBER: | | D 9 616 706 |
SERIAL NUMBER PREFIX: | | |
YEAR INTRODUCED: | | |
YEAR DISCONTINUED: | | 1978 |
ENGINE DISPLACEMENT: | | 52cc (3.18 cu. in.) |
NUMBER OF CYLINDERS: | | 1 |
CYLINDER BORE: | | 45 mm (1.757 in.) |
PISTON STROKE: | | 32 mm (1.260 in.) |
PISTON RING THICKNESS: | | |
CYLINDER TYPE: | | Aluminum with chrome plated bore |
INTAKE METHOD: | | Piston ported |
MANUFACTURER ADVERTISED H.P.: | | |
WEIGHT: | | |
OPERATOR CONFIGURATION: | | One Man operation |
HANDLEBAR SYSTEM: | | Anti-vibration |
CHAIN BRAKE: | | Optional, Mechanical |
CLUTCH: | | Centrifugal |
DRIVE TYPE: | | Direct |
CONSTRUCTION: | | Die cast magnesium |
MAGNETO TYPE: | | Bosch flywheel magneto |
CARBURETOR: | | Walbro HDC-50 |
MAJOR REPAIR KIT: | | K10-HDC |
MINOR REPAIR KIT: | | D10-HDC |
AIR FILTER SYSTEM: | | Two laminar plastic screens |
STARTER TYPE: | | Automatic rewind |
OIL PUMP: | | Automatic, adjustable, gear driven |
MAXIMUM ENGINE RPM: | | |
IDLE RPM: | | |
IGNITION TIMING: | | 28 degrees before TDC. 2.4 mm (.095 in.) |
BREAKER POINT SETTING: | | 0.35 to 0.45 mm (0.014 to 0.016 in.) |
FLYWHEEL/COIL AIR GAP: | | Position is fixed |
SPARK PLUG TYPE: | | Bosch WKA 200 TR 6 |
SPARK PLUG GAP: | | 0.5 mm (0.020 in.) |
CRANKSHAFT MAIN BEARINGS: | | Ball |
FUEL TANK CAPACITY: | | 530 ml (18 fl. oz.) |
FUEL OIL RATIO: | | 50:1 with SOLO 2-cycle mix oil |
RECOMMENDED FUEL OCTANE: | | Regular grade |
MIX OIL SPECIFICATION: | | SOLO 2-cycle mix oil |
CHAIN PITCH: | | .325 in. |
CHAIN TYPE: | | |
BAR MOUNT PATTERN: | | |
SHORTEST GUIDE BAR SUPPLIED: | | 35 cm (14 in.) |
LONGEST GUIDE BAR SUPPLIED: | | 50 cm (20 in.) |
COLOUR SCHEME: | | Red and Black enamel |
PAINT CODES: | | |
ILLUSTRATED PARTS LIST: | | |
SERVICE MANUAL: | | |