MANUFACTURED BY: |  | TITAN CHAIN SAWS INC. |
 | | SEATTLE, WASHINGTON, U.S.A. |
SERIES OR ASSEMBLY NUMBER: | | |
SERIAL NUMBER PREFIX: | | |
YEAR INTRODUCED: | | 1950 |
YEAR DISCONTINUED: | | 1952 |
ENGINE DISPLACEMENT: | | 4.52 cu. in. (74ccm) |
NUMBER OF CYLINDERS: | | 1 |
CYLINDER BORE: | | 1.8125 in. (46mm) |
PISTON STROKE: | | 1.750 in. (44mm) |
PISTON RING THICKNESS: | | |
CYLINDER TYPE: | | Aluminum with cast iron sleeve |
INTAKE METHOD: | | Rotary valve |
MANUFACTURER ADVERTISED H.P.: | | Not advertised |
WEIGHT: | | 31 lbs. |
OPERATOR CONFIGURATION: | | One Man operation |
HANDLEBAR SYSTEM: | | Rigid |
CHAIN BRAKE: | | none |
CLUTCH: | | Centrifugal |
DRIVE TYPE: | | Bevel gear transmission |
CONSTRUCTION: | | Sand cast aluminum |
MAGNETO TYPE: | | Bendix Scintilla |
CARBURETOR: | | Tillotson AJ series float type |
MAJOR REPAIR KIT: | | n/a |
MINOR REPAIR KIT: | | n/a |
AIR FILTER SYSTEM: | | Wire screen (Chore Girl) |
STARTER TYPE: | | Titan automatic rewind with steel cable |
OIL PUMP: | | Tank is pressurized, push button to oil |
MAXIMUM ENGINE RPM: | | |
IDLE RPM: | | |
IGNITION TIMING: | | Timing tool required |
BREAKER POINT SETTING: | | 0.018 to 0.020 in. (0.45 to 0.51 mm) |
FLYWHEEL/COIL AIR GAP: | | Position is fixed |
SPARK PLUG TYPE: | | Champion J6J |
SPARK PLUG GAP: | | .025 in. |
CRANKSHAFT MAIN BEARINGS: | | Ball |
FUEL TANK CAPACITY: | | |
FUEL OIL RATIO: | | 1-1/2 pints oil to 1 gallon fuel U.S. measure |
RECOMMENDED FUEL OCTANE: | | Regular |
MIX OIL SPECIFICATION: | | SAE 50 |
CHAIN PITCH: | | 9/16 in. |
CHAIN TYPE: | | Titan |
BAR MOUNT PATTERN: | | |
SHORTEST GUIDE BAR SUPPLIED: | | 18 in. (45 cm) |
LONGEST GUIDE BAR SUPPLIED: | | 44 in. (112 cm) |
COLOUR SCHEME: | | Titan Blue |
PAINT CODES: | | |
ILLUSTRATED PARTS LIST: | | |
SERVICE MANUAL: | | |