Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: 7414

MANUFACTURED BY:
FLEETWOOD
SOUTH MILWAUKEE, WISCONSIN, U.S.A.
SERIES OR ASSEMBLY NUMBER:
SERIAL NUMBER PREFIX:
YEAR INTRODUCED:
1957
YEAR DISCONTINUED:
ENGINE DISPLACEMENT:
4.7 cu. in. (77cc)
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
2.0 in. (50.8mm)
PISTON STROKE:
1.50 in. (38mm)
PISTON RING THICKNESS:
CYLINDER TYPE:
Aluminum with cast iron sleeve
INTAKE METHOD:
Reed valves
MANUFACTURER ADVERTISED H.P.:
3.5
WEIGHT:
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
Rigid
CHAIN BRAKE:
none
CLUTCH:
Fairbanks Morse centrifugal
DRIVE TYPE:
Direct
CONSTRUCTION:
Sand cast magnesium
MAGNETO TYPE:
Wico FW
CARBURETOR:
Tillotson MD series float type
MAJOR REPAIR KIT:
nla
MINOR REPAIR KIT:
nla
AIR FILTER SYSTEM:
Skinner ribbon filter element
STARTER TYPE:
Fairbanks Morse automatic rewind
OIL PUMP:
Manual
MAXIMUM ENGINE RPM:
4,500
IDLE RPM:
IGNITION TIMING:
0.175 in. (4.4 mm) before TDC
BREAKER POINT SETTING:
0.020 in. (0.51mm)
FLYWHEEL/COIL AIR GAP:
fixed
SPARK PLUG TYPE:
Champion J8J, Autolite A7X, AC M45
SPARK PLUG GAP:
0.030 in. (0.76mm)
CRANKSHAFT MAIN BEARINGS:
Ball
FUEL TANK CAPACITY:
1-1/4 U.S. quarts (1182ml)
FUEL OIL RATIO:
1/2 pint to 1 U.S. gallon
RECOMMENDED FUEL OCTANE:
72 to 83 (regular grade)
MIX OIL SPECIFICATION:
Two-stroke mix oil
CHAIN PITCH:
7/16 in.
CHAIN TYPE:
Oregon 62C
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED:
14 in. (35cm)
LONGEST GUIDE BAR SUPPLIED:
14 in.
COLOUR SCHEME:
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:
Used Power Products AH-47 engine



 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2024 MIKE ACRES - All rights are reserved.