Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: XA

MANUFACTURED BY:
JONSEREDS FABRIKERS AB
PARTILLE, SWEDEN
SERIES OR ASSEMBLY NUMBER:
SERIAL NUMBER PREFIX:
YEAR INTRODUCED:
1954
YEAR DISCONTINUED:
1960
ENGINE DISPLACEMENT:
50cc (3.05 cu. in.)
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
39.7mm (1.56 in.)
PISTON STROKE:
40mm (1.57 in.)
PISTON RING THICKNESS:
CYLINDER TYPE:
Chrome plated aluminum
INTAKE METHOD:
Rotary valve
MANUFACTURER ADVERTISED H.P.:
1.3kw @ 4500 rpm
WEIGHT:
10kg (22lbs.)
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
Rigid
CHAIN BRAKE:
none
CLUTCH:
Centrifugal
DRIVE TYPE:
Gear reduction
CONSTRUCTION:
Die cast magnesium
MAGNETO TYPE:
none
CARBURETOR:
Injector
MAJOR REPAIR KIT:
MINOR REPAIR KIT:
AIR FILTER SYSTEM:
Metallic screen
STARTER TYPE:
Automatic rewind
OIL PUMP:
Manual
MAXIMUM ENGINE RPM:
6000
IDLE RPM:
IGNITION TIMING:
Diesel
BREAKER POINT SETTING:
none
FLYWHEEL/COIL AIR GAP:
SPARK PLUG TYPE:
none
SPARK PLUG GAP:
CRANKSHAFT MAIN BEARINGS:
Ball
FUEL TANK CAPACITY:
1.3 litres
FUEL OIL RATIO:
10:1
RECOMMENDED FUEL OCTANE:
Diesel, Kerosene or gasoline
MIX OIL SPECIFICATION:
SAE 50 or SAE 60
CHAIN PITCH:
12.7mm (.500in) 1/2"
CHAIN TYPE:
Chipper
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED:
48 cm (19 in.)
LONGEST GUIDE BAR SUPPLIED:
COLOUR SCHEME:
Green
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:
Runs on Diesel fuel, Kerosene or gasoline mixed with oil. To start a glow plug must be heated with a built in propane heating system.

Photographs courtesy George Blake collection
brochure courtesy Mats Hedin collection

 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2024 MIKE ACRES - All rights are reserved.