MANUFACTURED BY: |  | HUSQVARNA VAPENFABRIKS AB |
 | | HUSKVARNA, SWEDEN |
SERIES OR ASSEMBLY NUMBER: | | |
SERIAL NUMBER PREFIX: | | |
YEAR INTRODUCED: | | 1980 |
YEAR DISCONTINUED: | | 1984 |
ENGINE DISPLACEMENT: | | 44cc (2.68 cu. in.) |
NUMBER OF CYLINDERS: | | 1 |
CYLINDER BORE: | | 42mm (1.654 in.) |
PISTON STROKE: | | 32mm (1.260 in.) |
PISTON RING THICKNESS: | | |
CYLINDER TYPE: | | Aluminum with chrome plated bore |
INTAKE METHOD: | | Piston ported |
MANUFACTURER ADVERTISED H.P.: | | |
WEIGHT: | | 6 kg with 32 cm bar & chain |
OPERATOR CONFIGURATION: | | One Man operation |
HANDLEBAR SYSTEM: | | Anti-vibration |
CHAIN BRAKE: | | Mechanical |
CLUTCH: | | Centrifugal |
DRIVE TYPE: | | Direct |
CONSTRUCTION: | | Die cast magnesium |
MAGNETO TYPE: | | Electronic |
CARBURETOR: | | Walbro HDC-51B type |
MAJOR REPAIR KIT: | | K10-HDC |
MINOR REPAIR KIT: | | D10-HDC |
AIR FILTER SYSTEM: | | Nylon mesh cartridge |
STARTER TYPE: | | Husqvarna automatic rewind |
OIL PUMP: | | Automatic, adjustable |
MAXIMUM ENGINE RPM: | | 9,000 |
IDLE RPM: | | |
IGNITION TIMING: | | fixed |
BREAKER POINT SETTING: | | none |
FLYWHEEL/COIL AIR GAP: | | 0.3 mm (0.012 in.) |
SPARK PLUG TYPE: | | Bosch WS7F |
SPARK PLUG GAP: | | 0.5mm (0.020 in.) |
CRANKSHAFT MAIN BEARINGS: | | Ball |
FUEL TANK CAPACITY: | | 500 ml |
FUEL OIL RATIO: | | 40:1 |
RECOMMENDED FUEL OCTANE: | | Regular |
MIX OIL SPECIFICATION: | | Two-stroke chain saw mix oil |
CHAIN PITCH: | | .325 in. |
CHAIN TYPE: | | |
BAR MOUNT PATTERN: | | 01 link |
SHORTEST GUIDE BAR SUPPLIED: | | 33cm (13 in.) |
LONGEST GUIDE BAR SUPPLIED: | | 35 cm (15 in.) |
COLOUR SCHEME: | | Husqvarna Orange enamel |
PAINT CODES: | | |
ILLUSTRATED PARTS LIST: | | |
SERVICE MANUAL: | | |