Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: AH58 powerhead

MANUFACTURED BY:
TECUMSEH POWER PRODUCTS
GRAFTON WI. U.S.A.
SERIES OR ASSEMBLY NUMBER:
AH58 powerhead
YEAR INTRODUCED:
YEAR DISCONTINUED:
ENGINE DISPLACEMENT:
5.8 cu. in. (95 cc)
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
2.090 in. (53 mm)
PISTON STROKE:
1.680 in. (42.6 mm)
CYLINDER TYPE:
Aluminum with cast iron sleeve
INTAKE METHOD:
Reed valves
MANUFACTURER ADVERTISED H.P.:
WEIGHT:
OPERATOR CONFIGURATION:
HANDLEBAR SYSTEM:
CHAIN BRAKE:
CLUTCH:
DRIVE TYPE:
CONSTRUCTION:
Aluminum
MAGNETO TYPE:
Tecumseh flywheel type
CARBURETOR:
usually Tillotson diaphragm type, otherwise Tecumseh type
MAJOR REPAIR KIT:
MINOR REPAIR KIT:
AIR FILTER SYSTEM:
STARTER TYPE:
usually Fairbanks Morse automatic rewind, otherwise Tecumseh type
OIL PUMP:
MAXIMUM ENGINE RPM:
IDLE RPM:
IGNITION TIMING:
0.172 in. (4.3 mm) BTDC
BREAKER POINT SETTING:
0.015 in. (0.038 mm)
FLYWHEEL/COIL AIR GAP:
position is fixed
SPARK PLUG TYPE:
Champion J8J, Autolite A7X, AC M45
SPARK PLUG GAP:
0.030 in.
CRANKSHAFT MAIN BEARINGS:
Ball
FUEL TANK CAPACITY:
FUEL OIL RATIO:
RECOMMENDED FUEL OCTANE:
MIX OIL SPECIFICATION:
CHAIN PITCH:
CHAIN TYPE:
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED:
LONGEST GUIDE BAR SUPPLIED:
COLOUR SCHEME:
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:
Split crankcase type engine supplied OEM to many chain saw manufacturers starting in the mid 1950's





 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2014 MIKE ACRES - All rights are reserved.