MANUFACTURED BY: |  | DOLMAR MASCHINEN-FABRIK GmbH & Co. |
 | | HAMBURG, GERMANY |
SERIES OR ASSEMBLY NUMBER: | | 105 |
SERIAL NUMBER PREFIX: | | |
YEAR INTRODUCED: | | 1980 |
YEAR DISCONTINUED: | | 1986 |
ENGINE DISPLACEMENT: | | 40 cc (2.44 cu. in.) |
NUMBER OF CYLINDERS: | | 1 |
CYLINDER BORE: | | 42 mm (1.65 in.) |
PISTON STROKE: | | 29 mm (1.14 in.) |
PISTON RING THICKNESS: | | |
CYLINDER TYPE: | | Aluminum with Nikasil plated bore |
INTAKE METHOD: | | Piston ported |
MANUFACTURER ADVERTISED H.P.: | | 1.7 kW (3.7 HP SAE) |
WEIGHT: | | 4.8 kg with 30 cm bar & chain
10.6 lbs. with 12 in. bar & chain |
OPERATOR CONFIGURATION: | | One Man operation, top handle saw |
HANDLEBAR SYSTEM: | | Rigid |
CHAIN BRAKE: | | Yes, mechanical |
CLUTCH: | | Centrifugal |
DRIVE TYPE: | | Direct |
CONSTRUCTION: | | Die cast magnesium |
MAGNETO TYPE: | | Electronic |
CARBURETOR: | | Walbro WA-85-1 series |
MAJOR REPAIR KIT: | | K10-WAT |
MINOR REPAIR KIT: | | D10-WAT |
AIR FILTER SYSTEM: | | Nylon mesh element |
STARTER TYPE: | | Dolmar automatic rewind |
OIL PUMP: | | Automatic, worm gear driven off crankshaft |
MAXIMUM ENGINE RPM: | | |
IDLE RPM: | | |
IGNITION TIMING: | | fixed |
BREAKER POINT SETTING: | | none |
FLYWHEEL/COIL AIR GAP: | | 0.2 to 0.3 mm (0.008 to 0.012 in.) |
SPARK PLUG TYPE: | | Champion RCJ8 |
SPARK PLUG GAP: | | 0.5 mm (0.020 in.) |
CRANKSHAFT MAIN BEARINGS: | | Roller |
FUEL TANK CAPACITY: | | |
FUEL OIL RATIO: | | 40:1 |
RECOMMENDED FUEL OCTANE: | | Regular |
MIX OIL SPECIFICATION: | | Dolmar two-cycle mix |
CHAIN PITCH: | | 3/8 in. low profile |
CHAIN TYPE: | | Oregon 91SG |
BAR MOUNT PATTERN: | | 03 link |
SHORTEST GUIDE BAR SUPPLIED: | | |
LONGEST GUIDE BAR SUPPLIED: | | |
COLOUR SCHEME: | | Dolmar Orange enamel with Black top cover
Dolmar Silver with Black top cover |
PAINT CODES: | | |
ILLUSTRATED PARTS LIST: | | |
SERVICE MANUAL: | | |