Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: P41

MANUFACTURED BY:
PIONEER SAWS LTD.
PETERBOROUGH, ONTARIO, CANADA
SERIES OR ASSEMBLY NUMBER:
YEAR INTRODUCED:
1976
YEAR DISCONTINUED:
1982
ENGINE DISPLACEMENT:
3.97 cu. in. (66cc)
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
1.875 in. (47.6mm)
PISTON STROKE:
1.437 in. (36.5mm)
PISTON RING THICKNESS:
CYLINDER TYPE:
Chrome plated aluminum
INTAKE METHOD:
Reed valve
MANUFACTURER ADVERTISED H.P.:
not advertised
WEIGHT:
16 lbs. (7.25 kg) powerhead only
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
Anti-vibration
CHAIN BRAKE:
Mechanical
CLUTCH:
Centrifugal
DRIVE TYPE:
Direct
CONSTRUCTION:
Die cast magnesium
MAGNETO TYPE:
Capacitor discharge electronic
CARBURETOR:
Tillotson HS-147D, HS-214A series
Walbro SDC-79A
MAJOR REPAIR KIT:
Tillotson RK-23HS
Walbro K10-SDC
MINOR REPAIR KIT:
Tillotson DG-5HS/T
Walbro D10-SDC
AIR FILTER SYSTEM:
Nylon mesh element
STARTER TYPE:
Pioneer automatic rewind, equipped with manual compression release button
OIL PUMP:
Automatic, worm gear driven
MAXIMUM ENGINE RPM:
9,500
IDLE RPM:
IGNITION TIMING:
30 degrees BTDC
BREAKER POINT SETTING:
none
FLYWHEEL/COIL AIR GAP:
0.012 in. (0.30 mm)
SPARK PLUG TYPE:
Champion KCJ7Y
SPARK PLUG GAP:
0.030 in.
CRANKSHAFT MAIN BEARINGS:
Ball
FUEL TANK CAPACITY:
26 fl. oz. (770 ml)
FUEL OIL RATIO:
24:1
RECOMMENDED FUEL OCTANE:
Regular
MIX OIL SPECIFICATION:
OMC Two-cycle mix
CHAIN PITCH:
3/8 in.
CHAIN TYPE:
Pioneer
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED:
16 in.
LONGEST GUIDE BAR SUPPLIED:
28 in.
COLOUR SCHEME:
Pioneer Yellow enamel with Forest Green top cover
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:



 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2020 MIKE ACRES - All rights are reserved.