Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: 632

MANUFACTURED BY:
SOLO KLEINMOTOREN GmbH
STUTTGART, GERMANY
SERIES OR ASSEMBLY NUMBER:
YEAR INTRODUCED:
1983
YEAR DISCONTINUED:
ENGINE DISPLACEMENT:
4.4 cu. in.
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
2.0 in.
PISTON STROKE:
1.3 in.
PISTON RING THICKNESS:
CYLINDER TYPE:
Aluminum with chrome plated bore
INTAKE METHOD:
Piston ported
MANUFACTURER ADVERTISED H.P.:
WEIGHT:
5.5kg (12 lbs.) with 35cm (14 in.) bar & chain
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
Rigid
CHAIN BRAKE:
none
CLUTCH:
Centrifugal
DRIVE TYPE:
Direct
CONSTRUCTION:
Die cast magnesium
MAGNETO TYPE:
Electronic
CARBURETOR:
Tillotson HS-20A
MAJOR REPAIR KIT:
MINOR REPAIR KIT:
AIR FILTER SYSTEM:
STARTER TYPE:
SOLO automatic rewind
OIL PUMP:
Automatic
MAXIMUM ENGINE RPM:
IDLE RPM:
IGNITION TIMING:
BREAKER POINT SETTING:
FLYWHEEL/COIL AIR GAP:
SPARK PLUG TYPE:
SPARK PLUG GAP:
CRANKSHAFT MAIN BEARINGS:
FUEL TANK CAPACITY:
32 fl. oz.
FUEL OIL RATIO:
RECOMMENDED FUEL OCTANE:
MIX OIL SPECIFICATION:
CHAIN PITCH:
3/8 in. low profile
CHAIN TYPE:
Oregon 91SG
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED:
35cm (14 in.)
LONGEST GUIDE BAR SUPPLIED:
40cm (16 in.)
COLOUR SCHEME:
Red and Black
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:



 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2022 MIKE ACRES - All rights are reserved.