Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: 530D

MANUFACTURED BY:
PORTER CABLE MACHINE CO.
SYRACUSE, NEW YORK, U.S.A.
SERIES OR ASSEMBLY NUMBER:
YEAR INTRODUCED:
1956
YEAR DISCONTINUED:
ENGINE DISPLACEMENT:
5.78 cu. in. (95cc)
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
PISTON STROKE:
PISTON RING THICKNESS:
CYLINDER TYPE:
Aluminum with cast iron sleeve
INTAKE METHOD:
Reed valves
MANUFACTURER ADVERTISED H.P.:
4 @ 5,300 rpm
WEIGHT:
27.5 lbs with 16 in. bar & chain
12.4kg with 40cm bar 7 chain
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
Rigid
CHAIN BRAKE:
none
CLUTCH:
Centrifugal
DRIVE TYPE:
Direct
CONSTRUCTION:
Die cast aluminum
MAGNETO TYPE:
Flywheel
CARBURETOR:
Tillotson HL series
MAJOR REPAIR KIT:
MINOR REPAIR KIT:
AIR FILTER SYSTEM:
Skinner ribbon filter element
STARTER TYPE:
Fairbanks Morse automatic rewind
OIL PUMP:
Manual
MAXIMUM ENGINE RPM:
5,300
IDLE RPM:
IGNITION TIMING:
BREAKER POINT SETTING:
FLYWHEEL/COIL AIR GAP:
SPARK PLUG TYPE:
SPARK PLUG GAP:
CRANKSHAFT MAIN BEARINGS:
Ball
FUEL TANK CAPACITY:
FUEL OIL RATIO:
RECOMMENDED FUEL OCTANE:
MIX OIL SPECIFICATION:
CHAIN PITCH:
7/16 in.
CHAIN TYPE:
Oregon 61C
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED:
16 in. (40cm)
LONGEST GUIDE BAR SUPPLIED:
24 in. (61cm)
COLOUR SCHEME:
Red and White enamel
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:
Guide bar mounted on left side of machine.



 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2020 MIKE ACRES - All rights are reserved.