Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: 40

MANUFACTURED BY:
INDIAN CHAIN SAWS
CRYSTAL LAKE, ILLINOIS, U.S.A.
SERIES OR ASSEMBLY NUMBER:
40C, 40R
SERIAL NUMBER PREFIX:
YEAR INTRODUCED:
before 1960
YEAR DISCONTINUED:
ENGINE DISPLACEMENT:
4.7 cu. in. (77 ccm)
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
2.0 in. (50.8 mm)
PISTON STROKE:
1.5 in. (38 mm)
PISTON RING THICKNESS:
CYLINDER TYPE:
Aluminum with Chrome plated bore
INTAKE METHOD:
Reed valves
MANUFACTURER ADVERTISED H.P.:
4
WEIGHT:
18.5 lbs.
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
Rigid
CHAIN BRAKE:
none
CLUTCH:
Centrifugal
DRIVE TYPE:
Direct
CONSTRUCTION:
Sand cast aluminum
MAGNETO TYPE:
CARBURETOR:
Tillotson HL series
MAJOR REPAIR KIT:
MINOR REPAIR KIT:
DG-1HL
AIR FILTER SYSTEM:
STARTER TYPE:
Automatic rewind, Fairbanks Morse type
OIL PUMP:
MAXIMUM ENGINE RPM:
IDLE RPM:
IGNITION TIMING:
BREAKER POINT SETTING:
FLYWHEEL/COIL AIR GAP:
SPARK PLUG TYPE:
SPARK PLUG GAP:
CRANKSHAFT MAIN BEARINGS:
FUEL TANK CAPACITY:
FUEL OIL RATIO:
RECOMMENDED FUEL OCTANE:
MIX OIL SPECIFICATION:
CHAIN PITCH:
CHAIN TYPE:
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED:
12 in.
LONGEST GUIDE BAR SUPPLIED:
16 in.
COLOUR SCHEME:
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:
Used Power Products AH-47 engine



 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2024 MIKE ACRES - All rights are reserved.