Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: 2MG POWER DRILL

MANUFACTURED BY:
MALL TOOL COMPANY
CHICAGO, ILLINOIS, U.S.A.
CRETE, ILLINOIS, U.S.A.
TORONTO, ONTARIO, CANADA
GUELPH, ONTARIO, CANADA
SERIES OR ASSEMBLY NUMBER:
YEAR INTRODUCED:
1955
YEAR DISCONTINUED:
ENGINE DISPLACEMENT:
6.45 cu. in., 105 cc
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
2.25 in., (57 mm)
PISTON STROKE:
1.625 in., (41 mm)
PISTON RING THICKNESS:
CYLINDER TYPE:
Porous Chrome Plated Aluminum
INTAKE METHOD:
Reed Valve
MANUFACTURER ADVERTISED H.P.:
5 Brake Horsepower
WEIGHT:
30lbs. (13.6kg.)
OPERATOR CONFIGURATION:
One Man
HANDLEBAR SYSTEM:
Rigid
CHAIN BRAKE:
none
CLUTCH:
2 Shoe Centrifugal Fairbanks Morse
DRIVE TYPE:
Bevel Gear Transmission
CONSTRUCTION:
Die Cast Magnesium Castings
MAGNETO TYPE:
Bendix Scintilla
CARBURETOR:
Tillotson ME Float Type or HP Diaphragm
MAJOR REPAIR KIT:
nla
MINOR REPAIR KIT:
nla
AIR FILTER SYSTEM:
Skinner Ribbon Element
STARTER TYPE:
Mall Automatic Rewind
OIL PUMP:
does not apply
MAXIMUM ENGINE RPM:
5,000
IDLE RPM:
IGNITION TIMING:
30 Degrees B.T.D.C.
BREAKER POINT SETTING:
.018 ln. to .020 ln.
FLYWHEEL/COIL AIR GAP:
SPARK PLUG TYPE:
Champion J6
SPARK PLUG GAP:
.025 in., (0.63 mm)
CRANKSHAFT MAIN BEARINGS:
Ball and Roller Type
FUEL TANK CAPACITY:
2 3/4 US Pints
FUEL OIL RATIO:
3/4 Pint to 1 Gallon
RECOMMENDED FUEL OCTANE:
72 to 84 Octane
MIX OIL SPECIFICATION:
SAE 30 Non-Detergent or Mall Oil
CHAIN PITCH:
CHAIN TYPE:
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED:
LONGEST GUIDE BAR SUPPLIED:
COLOUR SCHEME:
Mall Red
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:



 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2022 MIKE ACRES - All rights are reserved.