Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: 31

MANUFACTURED BY:
POULAN MANUFACTURING CORP.
SHREVEPORT, LOUSIANA, U.S.A.
SERIES OR ASSEMBLY NUMBER:
YEAR INTRODUCED:
1963
YEAR DISCONTINUED:
1968, obsoleted 1975
ENGINE DISPLACEMENT:
4.18 cu. in. (68ccm)
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
2.0625 in. (52.3mm)
PISTON STROKE:
1.250 in. (31.75mm)
PISTON RING THICKNESS:
CYLINDER TYPE:
Aluminum with cast iron liner
INTAKE METHOD:
Reed valve
MANUFACTURER ADVERTISED H.P.:
Not advertised
WEIGHT:
16.75 lbs.
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
Rigid
CHAIN BRAKE:
none
CLUTCH:
Centrifugal
DRIVE TYPE:
Direct
CONSTRUCTION:
Sand cast aluminum
MAGNETO TYPE:
Wico
CARBURETOR:
Tillotson HL series
MAJOR REPAIR KIT:
MINOR REPAIR KIT:
DG-1HL
AIR FILTER SYSTEM:
Skinner ribbon element
STARTER TYPE:
Fairbanks Morse automatic rewind
OIL PUMP:
Manual
MAXIMUM ENGINE RPM:
6,500
IDLE RPM:
when clutch disengages
IGNITION TIMING:
position stator mid range of mounting holes
BREAKER POINT SETTING:
0.020 in. (0.51 mm)
FLYWHEEL/COIL AIR GAP:
fixed
SPARK PLUG TYPE:
Champion J6J, Autolite A3X
SPARK PLUG GAP:
0.025 in. (0.63 mm)
CRANKSHAFT MAIN BEARINGS:
Ball and caged needle roller
FUEL TANK CAPACITY:
28 oz. (828ml)
FUEL OIL RATIO:
16:1
RECOMMENDED FUEL OCTANE:
Regular
MIX OIL SPECIFICATION:
Poulan mix oil
CHAIN PITCH:
.404 in., 7/16 in. or 3/8 in. optional
CHAIN TYPE:
Oregon 52C or 62C
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED:
16 in. (40 cm) HN type
LONGEST GUIDE BAR SUPPLIED:
28 in. (71 cm)
COLOUR SCHEME:
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:
Farmer special $129.95



 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2021 MIKE ACRES - All rights are reserved.