Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: 625

MANUFACTURED BY:
JONSEREDS FABRIKERS AB
PARTILLE, SWEDEN
SERIES OR ASSEMBLY NUMBER:
SERIAL NUMBER PREFIX:
YEAR INTRODUCED:
1987
YEAR DISCONTINUED:
1997
ENGINE DISPLACEMENT:
61.5 ccm (3.75 cu. in.)
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
48mm (1.89 in.)
PISTON STROKE:
34mm (1.34 in.)
PISTON RING THICKNESS:
used 1 ring, 503-2890-15
CYLINDER TYPE:
Aluminum with Chrome plated bore
INTAKE METHOD:
Piston ported
MANUFACTURER ADVERTISED H.P.:
4.0 (2.9 kW)
WEIGHT:
6.2 kg (13.6 lbs.) powerhead only
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
Anti-vibration
CHAIN BRAKE:
Mechanical
CLUTCH:
Centrifugal
DRIVE TYPE:
Direct
CONSTRUCTION:
Die cast Magnesium
MAGNETO TYPE:
Electronic
CARBURETOR:
Tillotson HS-237, or HS-251A series
MAJOR REPAIR KIT:
RK-23HS
MINOR REPAIR KIT:
DG-5HS/T
AIR FILTER SYSTEM:
Nylon mesh cartridge
STARTER TYPE:
Jonsered automatic rewind
OIL PUMP:
Automatic, worm gear driven
MAXIMUM ENGINE RPM:
IDLE RPM:
2,900
IGNITION TIMING:
fixed
BREAKER POINT SETTING:
none
FLYWHEEL/COIL AIR GAP:
0.3 to 0.4 mm (0.012 to 0.016 in.)
SPARK PLUG TYPE:
Bosch WS7F
SPARK PLUG GAP:
0.5mm (0.020 in.)
CRANKSHAFT MAIN BEARINGS:
Ball
FUEL TANK CAPACITY:
730 ml (24.6 fl. oz.)
FUEL OIL RATIO:
50:1
RECOMMENDED FUEL OCTANE:
Regular
MIX OIL SPECIFICATION:
Electrolux approved two-cycle chain saw mix oil
CHAIN PITCH:
3/8 in.
CHAIN TYPE:
Oregon 73
BAR MOUNT PATTERN:
17 link
SHORTEST GUIDE BAR SUPPLIED:
38 cm (15 in.)
LONGEST GUIDE BAR SUPPLIED:
60 cm (24 in.)
COLOUR SCHEME:
Red and Black enamel
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:


Colour photographs courtesy Eric Olsen

 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2024 MIKE ACRES - All rights are reserved.