MANUFACTURED BY: |  | PIONEER SAWS LTD. |
 | | PETERBOROUGH, ONTARIO, CANADA |
SERIES OR ASSEMBLY NUMBER: | | |
SERIAL NUMBER PREFIX: | | |
YEAR INTRODUCED: | | 1969 |
YEAR DISCONTINUED: | | 1977 |
ENGINE DISPLACEMENT: | | 3.546 cu. in. (58ccm) |
NUMBER OF CYLINDERS: | | 1 |
CYLINDER BORE: | | 1.8125 (46mm) |
PISTON STROKE: | | 1.325 in. (35mm) |
PISTON RING THICKNESS: | | 2 rings used |
CYLINDER TYPE: | | Aluminum with chrome plated bore |
INTAKE METHOD: | | Reed valves |
MANUFACTURER ADVERTISED H.P.: | | not advertised |
WEIGHT: | | 13 lbs. 6 oz. (7.06 kg) powerhead only |
OPERATOR CONFIGURATION: | | One Man operation |
HANDLEBAR SYSTEM: | | Rigid |
CHAIN BRAKE: | | none |
CLUTCH: | | Centrifugal, 2 metal shoes |
DRIVE TYPE: | | Direct |
CONSTRUCTION: | | Die cast magnesium |
MAGNETO TYPE: | | Wico |
CARBURETOR: | | Tillotson HS-44A series |
MAJOR REPAIR KIT: | | RK-23HS |
MINOR REPAIR KIT: | | DG-5HS/T |
AIR FILTER SYSTEM: | | Flocked wire screen |
STARTER TYPE: | | Pioneer automatic rewind, 426752 nylon cord |
OIL PUMP: | | Manual |
MAXIMUM ENGINE RPM: | | 7,000 |
IDLE RPM: | | |
IGNITION TIMING: | | 30 degrees before TDC |
BREAKER POINT SETTING: | | 0.015 in. (0.38mm) |
FLYWHEEL/COIL AIR GAP: | | position is fixed |
SPARK PLUG TYPE: | | Champion CJ8 |
SPARK PLUG GAP: | | 0.030 in. (0.76mm) |
CRANKSHAFT MAIN BEARINGS: | | Caged needle roller (Torrington type) |
FUEL TANK CAPACITY: | | 20 fl. oz. (600 ml) |
FUEL OIL RATIO: | | 16:1 |
RECOMMENDED FUEL OCTANE: | | Regular |
MIX OIL SPECIFICATION: | | OMC Two-cycle chain saw mix oil |
CHAIN PITCH: | | 3/8 in. |
CHAIN TYPE: | | Pioneer |
BAR MOUNT PATTERN: | | 01 link |
SHORTEST GUIDE BAR SUPPLIED: | | 16 in. (40cm) |
LONGEST GUIDE BAR SUPPLIED: | | 20 in. (51cm) |
COLOUR SCHEME: | | Pioneer Yellow enamel |
PAINT CODES: | | |
ILLUSTRATED PARTS LIST: | | |
SERVICE MANUAL: | | |