Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: 100

MANUFACTURED BY:
DOLMAR MASCHINEN-FABRIK GmbH & Co.
HAMBURG, GERMANY
SERIES OR ASSEMBLY NUMBER:
YEAR INTRODUCED:
1984
YEAR DISCONTINUED:
ENGINE DISPLACEMENT:
33 cc (2.0 cu. in.)
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
37 mm (1.46 in.)
PISTON STROKE:
31 mm (1.22 in.)
CYLINDER TYPE:
Aluminum with chrome plated bore
INTAKE METHOD:
Piston ported
MANUFACTURER ADVERTISED H.P.:
1.2 kW (2.6 HP SAE)
WEIGHT:
4.3 kg with 30 cm bar & chain
9.5 lbs. with 12 in. bar & chain
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
Anti-vibration
CHAIN BRAKE:
Yes
CLUTCH:
Centrifugal
DRIVE TYPE:
Direct
CONSTRUCTION:
Die cast magnesium
MAGNETO TYPE:
Electronic
CARBURETOR:
Walbro WT-9-1, 59-1, 174-1, 390-1, 505-1, 505-1, 506-1
MAJOR REPAIR KIT:
K20-WAT
MINOR REPAIR KIT:
D10-WAT
AIR FILTER SYSTEM:
Nylon mesh element
STARTER TYPE:
Dolmar automatic rewind
OIL PUMP:
Automatic piston type
MAXIMUM ENGINE RPM:
11,500 maximum free speed with bar & chain
IDLE RPM:
2,600
IGNITION TIMING:
fixed
BREAKER POINT SETTING:
none
FLYWHEEL/COIL AIR GAP:
0.2 mm (0.008 in.)
SPARK PLUG TYPE:
Champion RDJ7Y, NGK BPMR6F
SPARK PLUG GAP:
0.5 mm (0.020 in.)
CRANKSHAFT MAIN BEARINGS:
Needle roller (Torrington)
FUEL TANK CAPACITY:
400 ml
FUEL OIL RATIO:
40:1 with Dolmar two-stroke oil
RECOMMENDED FUEL OCTANE:
Regular
MIX OIL SPECIFICATION:
Dolmar two-stroke oil
CHAIN PITCH:
3/8 in. low profile
CHAIN TYPE:
Oregon 91SG
BAR MOUNT PATTERN:
03 link
SHORTEST GUIDE BAR SUPPLIED:
30 cm (12 in.)
LONGEST GUIDE BAR SUPPLIED:
35 cm (14 in.)
COLOUR SCHEME:
Dolmar Orange enamel
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:



 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2019 MIKE ACRES - All rights are reserved.