MANUFACTURED BY: |  | DANARM PTY. LTD. AUSTRALIA |
 | | SYDNEY, AUSTRALIA |
SERIES OR ASSEMBLY NUMBER: | | |
SERIAL NUMBER PREFIX: | | |
YEAR INTRODUCED: | | 1964 |
YEAR DISCONTINUED: | | |
ENGINE DISPLACEMENT: | | 7.81 cu. in. 128cc) |
NUMBER OF CYLINDERS: | | 1 |
CYLINDER BORE: | | 2.24 in. (57mm) |
PISTON STROKE: | | 2.0 in. (50mm) |
PISTON RING THICKNESS: | | |
CYLINDER TYPE: | | Aluminum with cast iron sleeve |
INTAKE METHOD: | | Piston ported |
MANUFACTURER ADVERTISED H.P.: | | 6.5 |
WEIGHT: | | 24 lbs. (10.8 kg.) powerhead only |
OPERATOR CONFIGURATION: | | One Man operation |
HANDLEBAR SYSTEM: | | Rigid |
CHAIN BRAKE: | | none |
CLUTCH: | | Centrifugal |
DRIVE TYPE: | | Direct |
CONSTRUCTION: | | Die cast magnesium |
MAGNETO TYPE: | | Villiers |
CARBURETOR: | | Tillotson HL series |
MAJOR REPAIR KIT: | | nla |
MINOR REPAIR KIT: | | DG-1HL |
AIR FILTER SYSTEM: | | Foam cartridge |
STARTER TYPE: | | Automatic rewind (Thumb operated decompression valve) |
OIL PUMP: | | Manual, thumb operated lever |
MAXIMUM ENGINE RPM: | | 4,500 |
IDLE RPM: | | |
IGNITION TIMING: | | |
BREAKER POINT SETTING: | | |
FLYWHEEL/COIL AIR GAP: | | |
SPARK PLUG TYPE: | | Lodge HH-14 |
SPARK PLUG GAP: | | |
CRANKSHAFT MAIN BEARINGS: | | Ball |
FUEL TANK CAPACITY: | | |
FUEL OIL RATIO: | | |
RECOMMENDED FUEL OCTANE: | | |
MIX OIL SPECIFICATION: | | |
CHAIN PITCH: | | 7/16 in. or 1/2 in. |
CHAIN TYPE: | | Oregon |
BAR MOUNT PATTERN: | | |
SHORTEST GUIDE BAR SUPPLIED: | | 16 in. (40cm) |
LONGEST GUIDE BAR SUPPLIED: | | 30 in. (76cm) |
COLOUR SCHEME: | | |
PAINT CODES: | | |
ILLUSTRATED PARTS LIST: | | |
SERVICE MANUAL: | | |