Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: SUPER-XL

MANUFACTURED BY:
HOMELITE CORPORATION
PORT CHESTER, NEW YORK, U.S.A.
SERIES OR ASSEMBLY NUMBER:
10045C
YEAR INTRODUCED:
1967
YEAR DISCONTINUED:
1968
ENGINE DISPLACEMENT:
3.55 cu. in. (57.4 cc)
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
1.8125 in.
PISTON STROKE:
1.375 in.
CYLINDER TYPE:
Aluminum with chrome plated bore
INTAKE METHOD:
Reed valves
MANUFACTURER ADVERTISED H.P.:
WEIGHT:
13 lbs. 14 oz. (5.96 kg) powerhead only
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
Rigid
CHAIN BRAKE:
none
CLUTCH:
Centrifugal
DRIVE TYPE:
Direct
CONSTRUCTION:
Die cast magnesium
MAGNETO TYPE:
Flywheel type
CARBURETOR:
Walbro SDC or Tillotson HS
MAJOR REPAIR KIT:
K10-SDC for Walbro
RK23-HS for Tillotson
MINOR REPAIR KIT:
D10-SDC for Walbro
AIR FILTER SYSTEM:
Flocked wire screen
STARTER TYPE:
Homelite automatic rewind
OIL PUMP:
Automatic with manual override
MAXIMUM ENGINE RPM:
6,000 under load
IDLE RPM:
IGNITION TIMING:
Position stator plate as far clockwise as possible to obtain 30 degrees BTDC
BREAKER POINT SETTING:
0.015 in.
FLYWHEEL/COIL AIR GAP:
Position is fixed
SPARK PLUG TYPE:
Champion CJ6
SPARK PLUG GAP:
0.025 in. (0.63 mm)
CRANKSHAFT MAIN BEARINGS:
Caged needle roller
FUEL TANK CAPACITY:
24.2 oz. (715 ml)
FUEL OIL RATIO:
32:1
RECOMMENDED FUEL OCTANE:
Regular
MIX OIL SPECIFICATION:
Homelite two-cycle mix oil
CHAIN PITCH:
3/8 in.
CHAIN TYPE:
Oregon 72D
BAR MOUNT PATTERN:
14 link
SHORTEST GUIDE BAR SUPPLIED:
16 in. (40 cm)
LONGEST GUIDE BAR SUPPLIED:
24 in. (61 cm)
COLOUR SCHEME:
Homelite Red enamel with White
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:



 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2019 MIKE ACRES - All rights are reserved.