MANUFACTURED BY: | | REMINGTON ARMS CO. |
| | PARK FOREST, ILLINOIS, U.S.A.
TORONTO, ONTARIO, CANADA |
SERIES OR ASSEMBLY NUMBER: | | |
SERIAL NUMBER PREFIX: | | |
YEAR INTRODUCED: | | 1971 |
YEAR DISCONTINUED: | | 1973 |
ENGINE DISPLACEMENT: | | 2.1 cu. in. (34.4 cc) |
NUMBER OF CYLINDERS: | | 1 |
CYLINDER BORE: | | 1.5 in. (38 mm) |
PISTON STROKE: | | 1.2 in. (30.4 mm) |
PISTON RING THICKNESS: | | |
CYLINDER TYPE: | | Aluminum with chrome plated bore |
INTAKE METHOD: | | Piston ported |
MANUFACTURER ADVERTISED H.P.: | | not advertised |
WEIGHT: | | 6-1/2 lbs. (2.9 kg) powerhead only |
OPERATOR CONFIGURATION: | | One Man operation |
HANDLEBAR SYSTEM: | | Rigid |
CHAIN BRAKE: | | none |
CLUTCH: | | Fairbanks Morse centrifugal |
DRIVE TYPE: | | Direct |
CONSTRUCTION: | | Injection molded plastic, die cast magnesium |
MAGNETO TYPE: | | Flywheel |
CARBURETOR: | | Tillotson HU series |
MAJOR REPAIR KIT: | | |
MINOR REPAIR KIT: | | |
AIR FILTER SYSTEM: | | Cellulose fiber element |
STARTER TYPE: | | Fairbanks Morse automatic rewind |
OIL PUMP: | | Automatic with manual override (pressurized tank) |
MAXIMUM ENGINE RPM: | | |
IDLE RPM: | | |
IGNITION TIMING: | | 30 degrees before TDC |
BREAKER POINT SETTING: | | 0.015 in. (0.38 mm) |
FLYWHEEL/COIL AIR GAP: | | fixed |
SPARK PLUG TYPE: | | Champion CJ6 |
SPARK PLUG GAP: | | 0.025 in. (0.63 mm) |
CRANKSHAFT MAIN BEARINGS: | | Caged needle roller |
FUEL TANK CAPACITY: | | 11 fl. oz. (325 ml) |
FUEL OIL RATIO: | | 16:1 |
RECOMMENDED FUEL OCTANE: | | Regular |
MIX OIL SPECIFICATION: | | Remington 48411 mix oil |
CHAIN PITCH: | | 1/4 in. |
CHAIN TYPE: | | Oregon |
BAR MOUNT PATTERN: | | |
SHORTEST GUIDE BAR SUPPLIED: | | 12 in. |
LONGEST GUIDE BAR SUPPLIED: | | |
COLOUR SCHEME: | | Green with Black air filter cover |
PAINT CODES: | | |
ILLUSTRATED PARTS LIST: | | |
SERVICE MANUAL: | | |