MANUFACTURED BY: |  | STIHL ANDREAS MASCHINENFABRIK |
 | | STUTTGART, GERMANY |
SERIES OR ASSEMBLY NUMBER: | | 1107 |
SERIAL NUMBER PREFIX: | | |
YEAR INTRODUCED: | | 1965 |
YEAR DISCONTINUED: | | |
ENGINE DISPLACEMENT: | | 75 ccm (4.57 cu. in.) |
NUMBER OF CYLINDERS: | | 1 |
CYLINDER BORE: | | 50 mm (2.0 in.) |
PISTON STROKE: | | 38 mm (1.50 in.) |
PISTON RING THICKNESS: | | 2 rings used, 1.5 mm |
CYLINDER TYPE: | | Aluminum with chrome plated bore |
INTAKE METHOD: | | Piston ported |
MANUFACTURER ADVERTISED H.P.: | | 4.5 HP @ 7,500 R.P.M. DIN |
WEIGHT: | | 10 kg with 40 cm bar & chain
22 lbs. with 17 in bar & chain |
OPERATOR CONFIGURATION: | | One Man operation |
HANDLEBAR SYSTEM: | | Rigid |
CHAIN BRAKE: | | none |
CLUTCH: | | Centrifugal |
DRIVE TYPE: | | Direct |
CONSTRUCTION: | | Die cast magnesium |
MAGNETO TYPE: | | Bosch flywheel type |
CARBURETOR: | | Tillotson HL-155B series |
MAJOR REPAIR KIT: | | RK-114HL |
MINOR REPAIR KIT: | | DG-5HL |
AIR FILTER SYSTEM: | | Nylon mesh element |
STARTER TYPE: | | Automatic rewind (Fairbanks Morse type) |
OIL PUMP: | | Automatic |
MAXIMUM ENGINE RPM: | | 7,000 to 7,500 |
IDLE RPM: | | 2,800 |
IGNITION TIMING: | | 2.8 mm (0.112 in.) before TDC |
BREAKER POINT SETTING: | | 0.4 mm (0.016 in.) |
FLYWHEEL/COIL AIR GAP: | | Position is fixed |
SPARK PLUG TYPE: | | Bosch W175T1 |
SPARK PLUG GAP: | | 0.51 mm (0.020 in.) |
CRANKSHAFT MAIN BEARINGS: | | Ball |
FUEL TANK CAPACITY: | | 1 litre (2.1 pints) |
FUEL OIL RATIO: | | 20:1 after break in |
RECOMMENDED FUEL OCTANE: | | Regular |
MIX OIL SPECIFICATION: | | Castrol 2-stroke SAE 40 |
CHAIN PITCH: | | .404 in. |
CHAIN TYPE: | | Oregon Chipper |
BAR MOUNT PATTERN: | | 07 link |
SHORTEST GUIDE BAR SUPPLIED: | | 43 cm (17 in.) |
LONGEST GUIDE BAR SUPPLIED: | | 53 cm (21 in.) |
COLOUR SCHEME: | | Grey with Red carburetor shroud and bar clamp |
PAINT CODES: | | |
ILLUSTRATED PARTS LIST: | | |
SERVICE MANUAL: | | |