MANUFACTURED BY: |  | Champion Saws Pty Ltd |
 | | 63 Pitt Street, Sidney, NSW Australia |
SERIES OR ASSEMBLY NUMBER: | | |
SERIAL NUMBER PREFIX: | | |
YEAR INTRODUCED: | | 1955 |
YEAR DISCONTINUED: | | |
ENGINE DISPLACEMENT: | | 160 cc 9.76 cu. in.) |
NUMBER OF CYLINDERS: | | 1 |
CYLINDER BORE: | | 60 mm (2.375 in.) |
PISTON STROKE: | | 53.9 mm (2.125 in.) |
PISTON RING THICKNESS: | | |
CYLINDER TYPE: | | Aluminum with cast iron sleeve |
INTAKE METHOD: | | |
MANUFACTURER ADVERTISED H.P.: | | |
WEIGHT: | | |
OPERATOR CONFIGURATION: | | One Man operation |
HANDLEBAR SYSTEM: | | rigid |
CHAIN BRAKE: | | none |
CLUTCH: | | Centrifugal |
DRIVE TYPE: | | Gear reduction transmission |
CONSTRUCTION: | | Sand cast aluminum |
MAGNETO TYPE: | | Wico |
CARBURETOR: | | Diaphragm |
MAJOR REPAIR KIT: | | |
MINOR REPAIR KIT: | | |
AIR FILTER SYSTEM: | | |
STARTER TYPE: | | Automatic rewind |
OIL PUMP: | | Manual pump, trigger actuated |
MAXIMUM ENGINE RPM: | | |
IDLE RPM: | | |
IGNITION TIMING: | | |
BREAKER POINT SETTING: | | |
FLYWHEEL/COIL AIR GAP: | | |
SPARK PLUG TYPE: | | |
SPARK PLUG GAP: | | 0.025 in. |
CRANKSHAFT MAIN BEARINGS: | | |
FUEL TANK CAPACITY: | | |
FUEL OIL RATIO: | | 16:1 |
RECOMMENDED FUEL OCTANE: | | Shell Motor Spirit |
MIX OIL SPECIFICATION: | | Shell 2T Two Stroke Oil |
CHAIN PITCH: | | 9/16" |
CHAIN TYPE: | | |
BAR MOUNT PATTERN: | | |
SHORTEST GUIDE BAR SUPPLIED: | | |
LONGEST GUIDE BAR SUPPLIED: | | |
COLOUR SCHEME: | | Yellow with unpainted aluminum castings |
PAINT CODES: | | |
ILLUSTRATED PARTS LIST: | | |
SERVICE MANUAL: | | |