Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: 35VR

MANUFACTURED BY:
HUSQVARNA VAPENFABRIKS AB
HUSKVARNA, SWEDEN
SERIES OR ASSEMBLY NUMBER:
107 series
SERIAL NUMBER PREFIX:
YEAR INTRODUCED:
YEAR DISCONTINUED:
1993
ENGINE DISPLACEMENT:
34 ccm (2.1 cu. in.)
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
36.5 mm (1.4375 in.)
PISTON STROKE:
32.5 mm (1.271 in.)
PISTON RING THICKNESS:
CYLINDER TYPE:
Aluminum with Chrome plated bore
INTAKE METHOD:
Piston ported
MANUFACTURER ADVERTISED H.P.:
Not advertised
WEIGHT:
3.7 kg (8 lbs. 2 oz.) powerhead only
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
Anti-vibration mounted
CHAIN BRAKE:
Yes
CLUTCH:
Centrifugal
DRIVE TYPE:
Direct
CONSTRUCTION:
Die cast Magnesium and Aluminum
MAGNETO TYPE:
Phelon
CARBURETOR:
Tillotson HU-18C
Walbro WA-58
MAJOR REPAIR KIT:
RK-14HU for Tillotson
K10-WAT for Walbro
MINOR REPAIR KIT:
DG-2HU for Tillotson
D10-WAT for Walbro
AIR FILTER SYSTEM:
Cellulose fiber element (Dacron)
STARTER TYPE:
Automatic rewind
OIL PUMP:
Automatic
MAXIMUM ENGINE RPM:
6,500
IDLE RPM:
IGNITION TIMING:
25 degrees before TDC
BREAKER POINT SETTING:
none
FLYWHEEL/COIL AIR GAP:
0.4 mm (0.016 in.)
SPARK PLUG TYPE:
Champion CJ-6
SPARK PLUG GAP:
0.63 mm (0.025 in.)
CRANKSHAFT MAIN BEARINGS:
Caged needle roller
FUEL TANK CAPACITY:
300 ml
FUEL OIL RATIO:
40:1
RECOMMENDED FUEL OCTANE:
Regular grade
MIX OIL SPECIFICATION:
Husqvarna chain saw mix oil
CHAIN PITCH:
3/8 in. Low Profile
CHAIN TYPE:
Oregon 91SG
BAR MOUNT PATTERN:
02 link
SHORTEST GUIDE BAR SUPPLIED:
30 cm (12 in.)
LONGEST GUIDE BAR SUPPLIED:
40 cm (16 in.)
COLOUR SCHEME:
Husqvarna Orange
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:



 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2024 MIKE ACRES - All rights are reserved.