Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: 358.35083

MANUFACTURED BY:
CRAFTSMAN (SEARS ROEBUCK & CO.)
CHICAGO, IL U.S.A.
SERIES OR ASSEMBLY NUMBER:
CRAFTSMAN 1.9 358.350830, 350831, 350832, 350833, 350834, 350911
YEAR INTRODUCED:
1974
YEAR DISCONTINUED:
1976
ENGINE DISPLACEMENT:
1.86 cu. in. (30.5 cc)
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
1.375 in. (34.92 mm)
PISTON STROKE:
1.250 in. (31.75 mm)
CYLINDER TYPE:
Aluminum with chrome plated bore
INTAKE METHOD:
Piston ported
MANUFACTURER ADVERTISED H.P.:
WEIGHT:
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
Rigid
CHAIN BRAKE:
none
CLUTCH:
Centrifugal
DRIVE TYPE:
Direct
CONSTRUCTION:
Die cast magnesium
MAGNETO TYPE:
Phelon breaker point flywheel magneto
CARBURETOR:
Tillotson HU series
MAJOR REPAIR KIT:
MINOR REPAIR KIT:
AIR FILTER SYSTEM:
Flocked wire screen
STARTER TYPE:
Automatic rewind located behind flywheel
OIL PUMP:
Automatic with manual override
MAXIMUM ENGINE RPM:
IDLE RPM:
IGNITION TIMING:
fixed
BREAKER POINT SETTING:
0.020 in. to 0.022 in. (0.51 to 0.55 mm)
FLYWHEEL/COIL AIR GAP:
0.010 in. (0.25 mm)
SPARK PLUG TYPE:
Champion CJ8
SPARK PLUG GAP:
0.025 in. (0.63 mm)
CRANKSHAFT MAIN BEARINGS:
Caged needle roller
FUEL TANK CAPACITY:
FUEL OIL RATIO:
32:1
RECOMMENDED FUEL OCTANE:
Regular grade, 72 to 83
MIX OIL SPECIFICATION:
Two-cycle chain saw mix oil, Poulan oil
CHAIN PITCH:
1/4 in.
CHAIN TYPE:
Poulan
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED:
10 in. (25 cm)
LONGEST GUIDE BAR SUPPLIED:
COLOUR SCHEME:
Red
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:
manufactured by Poulan based on their model 20

 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2017 MIKE ACRES - All rights are reserved.