MANUFACTURED BY: |  | TITAN CHAIN SAWS INC. |
 | | SEATTLE, WASHINGTON, U.S.A. |
SERIES OR ASSEMBLY NUMBER: | | |
SERIAL NUMBER PREFIX: | | |
YEAR INTRODUCED: | | 1954 |
YEAR DISCONTINUED: | | |
ENGINE DISPLACEMENT: | | 5.10 cu. in. (83.5ccm) |
NUMBER OF CYLINDERS: | | 1 |
CYLINDER BORE: | | 2 in. (50.8mm) |
PISTON STROKE: | | 1.625 in. (41.2mm) |
PISTON RING THICKNESS: | | |
CYLINDER TYPE: | | Aluminum with cast iron sleeve |
INTAKE METHOD: | | Reed valve |
MANUFACTURER ADVERTISED H.P.: | | 3 |
WEIGHT: | | 27 lbs. with 14 in. bar & chain |
OPERATOR CONFIGURATION: | | One Man operation |
HANDLEBAR SYSTEM: | | Rigid |
CHAIN BRAKE: | | None |
CLUTCH: | | Centrifugal |
DRIVE TYPE: | | Direct |
CONSTRUCTION: | | Sand cast Magnesium |
MAGNETO TYPE: | | Wico |
CARBURETOR: | | Tillotson H series, fuel tank is pressurized |
MAJOR REPAIR KIT: | | nla |
MINOR REPAIR KIT: | | nla |
AIR FILTER SYSTEM: | | Skinner ribbon element |
STARTER TYPE: | | Fairbanks Morse automatic rewind |
OIL PUMP: | | Automatic |
MAXIMUM ENGINE RPM: | | 4,000 |
IDLE RPM: | | where clutch disengages |
IGNITION TIMING: | | |
BREAKER POINT SETTING: | | 0.018 in. to 0.020 in. |
FLYWHEEL/COIL AIR GAP: | | |
SPARK PLUG TYPE: | | Champion J-12 |
SPARK PLUG GAP: | | 0.040 in. |
CRANKSHAFT MAIN BEARINGS: | | Ball |
FUEL TANK CAPACITY: | | |
FUEL OIL RATIO: | | 1/2 pint to 1 gallon |
RECOMMENDED FUEL OCTANE: | | Regular |
MIX OIL SPECIFICATION: | | SAE 30 or SAE 40 |
CHAIN PITCH: | | 7/16 in. |
CHAIN TYPE: | | Blue Jet |
BAR MOUNT PATTERN: | | |
SHORTEST GUIDE BAR SUPPLIED: | | 14 in. |
LONGEST GUIDE BAR SUPPLIED: | | 22 in. |
COLOUR SCHEME: | | |
PAINT CODES: | | |
ILLUSTRATED PARTS LIST: | | |
SERVICE MANUAL: | | |