MANUFACTURED BY: |  | McCULLOCH MOTORS CORP. |
 | | LOS ANGELES, CALIFORNIA, U.S.A. |
SERIES OR ASSEMBLY NUMBER: | | 600082 |
SERIAL NUMBER PREFIX: | | 12-, 13- |
YEAR INTRODUCED: | | July 1975 |
YEAR DISCONTINUED: | | February 1977 |
ENGINE DISPLACEMENT: | | 2.3 cu. in. (40 ccm) |
NUMBER OF CYLINDERS: | | 1 |
CYLINDER BORE: | | 1.562 in. (39.6 mm) |
PISTON STROKE: | | 1.20 in. (30 mm) |
PISTON RING THICKNESS: | | |
CYLINDER TYPE: | | Aluminum with CHROME plated bore |
INTAKE METHOD: | | Piston ported |
MANUFACTURER ADVERTISED H.P.: | | not advertised |
WEIGHT: | | |
OPERATOR CONFIGURATION: | | One Man operation |
HANDLEBAR SYSTEM: | | Anti-vibration |
CHAIN BRAKE: | | Yes |
CLUTCH: | | Centrifugal |
DRIVE TYPE: | | Direct |
CONSTRUCTION: | | Die cast MAGNESIUM, injection molded polymer |
MAGNETO TYPE: | | Flywheel magneto |
CARBURETOR: | | 91571 |
MAJOR REPAIR KIT: | | |
MINOR REPAIR KIT: | | |
AIR FILTER SYSTEM: | | Flocked wire screen element |
STARTER TYPE: | | Automatic rewind |
OIL PUMP: | | Automatic with manual override |
MAXIMUM ENGINE RPM: | | |
IDLE RPM: | | |
IGNITION TIMING: | | 26 degrees before TDC |
BREAKER POINT SETTING: | | 0.018 in. (0.457 mm) |
FLYWHEEL/COIL AIR GAP: | | 0.012 in. (0.3 mm) |
SPARK PLUG TYPE: | | AC CS42T |
SPARK PLUG GAP: | | 0.025 in. (0.63 mm) |
CRANKSHAFT MAIN BEARINGS: | | Caged needle rollers |
FUEL TANK CAPACITY: | | |
FUEL OIL RATIO: | | 40:1 |
RECOMMENDED FUEL OCTANE: | | Regular grade |
MIX OIL SPECIFICATION: | | McCulloch two-cycle chain saw mix oil |
CHAIN PITCH: | | 3/8 in. low profile |
CHAIN TYPE: | | McCulloch |
BAR MOUNT PATTERN: | | 08 link |
SHORTEST GUIDE BAR SUPPLIED: | | 12 in. (30 cm) |
LONGEST GUIDE BAR SUPPLIED: | | 18 in. (45 cm) |
COLOUR SCHEME: | | McCulloch Yellow with Black |
PAINT CODES: | | |
ILLUSTRATED PARTS LIST: | | 92321B, |
SERVICE MANUAL: | | 93561, micro fiche card 33 |