Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: 1613

MANUFACTURED BY:
SKIL CORPORATION
CHICAGO, ILLINOIS, U.S.A.
SERIES OR ASSEMBLY NUMBER:
SERIAL NUMBER PREFIX:
YEAR INTRODUCED:
1977
YEAR DISCONTINUED:
ENGINE DISPLACEMENT:
2.1 cu. in. (34cc)
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
1.4375 in. (36.5 mm)
PISTON STROKE:
1.28125 in. (32.5 mm)
PISTON RING THICKNESS:
CYLINDER TYPE:
Aluminum with chrome plated bore
INTAKE METHOD:
Piston ported
MANUFACTURER ADVERTISED H.P.:
WEIGHT:
6.5 Lbs. (2.94 kg) powerhead only
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
Rigid
CHAIN BRAKE:
none
CLUTCH:
Centrifugal, 2 shoe
DRIVE TYPE:
Direct
CONSTRUCTION:
Die cast magnesium
MAGNETO TYPE:
Flywheel type
CARBURETOR:
Tillotson HU series or Walbro WA series
MAJOR REPAIR KIT:
MINOR REPAIR KIT:
AIR FILTER SYSTEM:
Cellulose fiber element
STARTER TYPE:
Automatic rewind
OIL PUMP:
Automatic with manual override
MAXIMUM ENGINE RPM:
7,000 to 9,500
IDLE RPM:
IGNITION TIMING:
Fixed
BREAKER POINT SETTING:
0.015 in. (0.38 mm)
FLYWHEEL/COIL AIR GAP:
0.016 in. (0.41 mm)
SPARK PLUG TYPE:
Champion CJ6
SPARK PLUG GAP:
0.025 in. (0.63 mm)
CRANKSHAFT MAIN BEARINGS:
Caged needle roller
FUEL TANK CAPACITY:
10 fl. oz. (300 ml)
FUEL OIL RATIO:
16:1
RECOMMENDED FUEL OCTANE:
Regular grade
MIX OIL SPECIFICATION:
Chain saw engine mix oil
CHAIN PITCH:
1/4 in.
CHAIN TYPE:
Oregon 25AP
BAR MOUNT PATTERN:
02 link
SHORTEST GUIDE BAR SUPPLIED:
10 in. (25 cm)
LONGEST GUIDE BAR SUPPLIED:
16 in. (40 cm)
COLOUR SCHEME:
Skil yellow with black
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:
Manufactured by Power Machinery Ltd., Vancouver, B.C.



 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2024 MIKE ACRES - All rights are reserved.