Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: MARK I V.I.P.

MANUFACTURED BY:
FRONTIER CHAIN SAWS
TRAIL, BRITISH COLUMBIA, CANADA
SERIES OR ASSEMBLY NUMBER:
101 series
YEAR INTRODUCED:
1975
YEAR DISCONTINUED:
ENGINE DISPLACEMENT:
2.1 cu. in. (34.4cc)
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
1.4375 in. (36.5 mm)
PISTON STROKE:
1.281 in. (32.5 mm)
PISTON RING THICKNESS:
CYLINDER TYPE:
Aluminum with chrome plated bore
INTAKE METHOD:
Piston ported
MANUFACTURER ADVERTISED H.P.:
Not advertised
WEIGHT:
6 lbs. 11 oz. (2.77 kg) powerhead only
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
Anti vibration mounted
CHAIN BRAKE:
none
CLUTCH:
Centrifugal
DRIVE TYPE:
Direct
CONSTRUCTION:
Die cast magnesium
MAGNETO TYPE:
Phelon
CARBURETOR:
Tillotson HU-18C
Walbro WA series
MAJOR REPAIR KIT:
RK-14HU
K10-WAT
MINOR REPAIR KIT:
DG-2HU
D10-WAT
AIR FILTER SYSTEM:
Cellulose fiber element
STARTER TYPE:
Frontier automatic rewind
OIL PUMP:
Manual
MAXIMUM ENGINE RPM:
6,500 (no load up to 12,000)
IDLE RPM:
IGNITION TIMING:
25 degrees before TDC
BREAKER POINT SETTING:
0.015 in. (0.38 mm)
FLYWHEEL/COIL AIR GAP:
0.016 in. (0.41 mm)
SPARK PLUG TYPE:
Champion CJ6
SPARK PLUG GAP:
0.025 in. (0.63 mm)
CRANKSHAFT MAIN BEARINGS:
Caged needle roller
FUEL TANK CAPACITY:
275 ml
FUEL OIL RATIO:
16:1
RECOMMENDED FUEL OCTANE:
Regular
MIX OIL SPECIFICATION:
chain saw two-cycle mix oil
CHAIN PITCH:
1/4 in.
CHAIN TYPE:
Oregon
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED:
12 in. (30 cm)
LONGEST GUIDE BAR SUPPLIED:
16 in. (40 cm)
COLOUR SCHEME:
Orange enamel
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:
Mk I model with anti vibation hande system



 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2022 MIKE ACRES - All rights are reserved.