Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host



Model: Pro65E

MANUFACTURED BY:
ALPINA (Societa per Azioni)
CONEGLIANO, ITALY
SERIES OR ASSEMBLY NUMBER:
SERIAL NUMBER PREFIX:
YEAR INTRODUCED:
YEAR DISCONTINUED:
ENGINE DISPLACEMENT:
65ccm (4.0 cu. in.)
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
47mm (1.85 in.)
PISTON STROKE:
37.3mm (1.47 in.)
PISTON RING THICKNESS:
CYLINDER TYPE:
Aluminum with Chrome plated bore
INTAKE METHOD:
Piston ported
MANUFACTURER ADVERTISED H.P.:
WEIGHT:
7kg (15.4 lbs.) powerhead only
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
CHAIN BRAKE:
CLUTCH:
Centrifugal
DRIVE TYPE:
Direct
CONSTRUCTION:
Die cast Magnesium
MAGNETO TYPE:
Electronic
CARBURETOR:
Tillotson HK-30A, HK-35A series
MAJOR REPAIR KIT:
RK-34HK
MINOR REPAIR KIT:
DG-1HK
AIR FILTER SYSTEM:
STARTER TYPE:
Automatic rewind
OIL PUMP:
Automatic
MAXIMUM ENGINE RPM:
IDLE RPM:
IGNITION TIMING:
fixed
BREAKER POINT SETTING:
none
FLYWHEEL/COIL AIR GAP:
SPARK PLUG TYPE:
Champion CJ7Y
SPARK PLUG GAP:
0.51mm (0.020 in.)
CRANKSHAFT MAIN BEARINGS:
Ball
FUEL TANK CAPACITY:
FUEL OIL RATIO:
16:1
RECOMMENDED FUEL OCTANE:
Regular
MIX OIL SPECIFICATION:
Two-stroke chain saw mix oil
CHAIN PITCH:
3/8 in.
CHAIN TYPE:
BAR MOUNT PATTERN:
14 link
SHORTEST GUIDE BAR SUPPLIED:
40cm (16 in.)
LONGEST GUIDE BAR SUPPLIED:
48cm (19 in.)
COLOUR SCHEME:
Yellow and Black
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

COMMENTS:



 

Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2024 MIKE ACRES - All rights are reserved.